Neon Heat Transfer Vinyl - Poli-Flex Premium from Poli-Tape

Neon heat transfer vinyl with high opacity and elasticity

  • Made of 100 µ thick ecological polyurethane with a matte finish
  • Suitable for cotton, cotton/polyester and polyester/acrylic fabrics without water-repellent coating
  • Sale unit:1 m, 2 m, 5 m, and 25 m rolls with a width of 50 cm

More information

Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Poli-Flex Premium neon heat transfer vinyl from Poli-Tape



> Description

> Colour reference list

> Transfer parameters

> Application instructions

> Wash resistance

> Weights

> Colour card

> Data sheet

> Safety data sheet



POLI-FLEX PREMIUM is an ecologically proven PU (polyurethane) film for heat transfer.

  • The liner is a self-adhesive PET (polyester) film that acts as a carrier
  • The 25-metre rolls have a Ø7.5 cm cardboard core
  • The raw materials are ecologically inert, do not contain PVC, plasticizers or heavy metals and are certified in accordance with Oeko-Tex Standard 100 Class I
  • Made in Germany by Poli-Tape




Find Pantone, HEX, RGB, CMYK and RAL equivalents:

Colour reference list Poli-Flex Premium (pdf - 0.57 MB)



  • Knife blade: 45º
  • Temperature: 160ºC
  • Time: 15 seconds
  • Pressure: 2.5 - 3.0 bar [medium pressure]



  • Cut out the design in mirror image with a vinyl cutter
  • Weed out your excess vinyl
  • Preheat the press to 160ºC
  • Place the garment on the press and pre-press for 4-5 seconds to remove wrinkles and moisture from the fabric
  • Position the vinyl over the garment and cover it with protective paper
  • Press for 15 seconds, medium pressure
  • Warm peel the liner
  • Press again the fabric for 2 seconds with the same parameters



  • Washing resistance: 80 ºC max
  • Wash inside out
  • Suitable for tumble dryer
  • You may use bleach and solvents



Roll 1 2 5 25
Weight (kg) 0.136 0.3 0.75 3.75



Poli-Flex Premium Colour Card (.pdf - 0,88 MB)



Data sheet Poli-Flex Premium (.pdf - 639 kB)



When used under normal conditions, this product does not generate or release any dangerous substances or hazardous chemicals. This is a non-hazardous product in accordance with the current GefStoffV and EU criteria. Therefore it is not necessary to prepare a Material Safety Data Sheet for this product. The Safety Data Sheet serves only to comply with the regulation to supply information in accordance with REACH Regulation (EC) No. 1907/2006 and is available on request. This is not a hazardous product with regards to transportation legislation; neither does it contain substances that are hazardous to water within the meaning of the federal water act. After use, dispose of the waste product in accordance with the local/national authorities.

More Information
Ref. 925423
Write Your Own Review
Post your question