Plastisol Foil Adhesive

Index

Description

Application parameters

Instructions for use

Data sheet

Safety data sheet

DESCRIPTION

• Suitable for any fabric composition
• Pre-drying can be carried out with a flash cure unit or heat gun
• If you do not have an oven, you can cure the base using a heat press
• Phthalate-free, but does not reach the maximum ecological grade as it contains PVC
• Stir well before use
• Do not thin with water
• Can be mixed with white base or plastisol pigments at any ratio
• Storage temperature: 5-30ºC
• Used screens can be cleaned with water
• Made in Turkey for Brildor

APPLICATION PARAMETERS

Running tests is recommended to ensure the desired result.

INSTRUCTIONS FOR USE

Coat the mesh with enough adhesive
and run the squeegee over the mesh twice          

Pre-dry at 160 ºC for 3-5 seconds
with a flash cure unit or a heat gun

Apply another layer of adhesive to the mesh.
The thicker the layer, the better the foil will adhere
to the fabric

Dry again at 160 ºC
for 3-5 seconds with a flash cure unit or a heat gun.

Lay the foil over the adhesive

Use an unexposed frame and a squeegee for
2 more strokes

Cure with a heat press (160-175ºC for 7-10 s) or with an oven
(160ºC for 90 s)

Peel off the excess foil when it has cooled down

DATA SHEET

• Data sheet plastisol adhesive for Brildor foil (.pdf- 0.18 MB)

SAFETY DATA SHEET

• Safety data sheet plastisol adhesive for Brildor foil (.pdf- 0.22 MB)