LED Backlit Frames with Sublimatable Acrylic

New
LED Backlit Frames with Sublimatable Acrylic

Box photo frames with internal lighting, for creating table lamps or wall lights.

Sublimate the acrylic sheet, insert it into the frame slot and you're done!

  • laminated MDF
  • LED strip with 3 light modes: warm, cool and combined
  • USB cable connection
  • Acrylic sheets 5 mm thick, available separately

More information

Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the LED Backlit Frames with Sublimatable Acrylic

 

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Measurements

> Recommended sublimation instructions and parameters

> Assembly instructions

> Related posts

 

DESCRIPTION

Frames

  • Ideal for creating illuminated pictures with photographs, illustrations, graphic designs or personalised messages
  • Box-type structure that enhances the image: 5.5 cm deep in white and 4.5 cm in light oak. Houses the LED strip inside
  • Photo block style design, stable on flat surfaces and suitable for horizontal or vertical placement
  • Available in square and rectangular shapes, with straight corners
  • Removable back cover with fastening tabs and wall hanger. Light oak models also include a rear stand
  • USB cable with buttons to switch on/off, adjust brightness and change the type of light
  • Supplied in a kraft cardboard box and protected with bubble wrap

Acrylic sheets

  • Transparent methacrylate 5 mm thick
  • Sublimable directly on the reverse (white side)
  • The image can be viewed through the transparent side
  • Supplied in a kraft cardboard box

 

THINGS TO KEEP IN MIND

  • Sublimable acrylic sheets not included, purchased separately
  • The sheets may include a protective plastic film on one side, which must be removed before sublimating
  • The rear stand is only available on light oak wood models
  • White frames have a depth of 5.5 cm, while light oak wood frames are 4.5 cm deep
  • Before hanging, check the orientation of the design and the position of the rear fastening system

 

TIPS AND ADVICE

  • Combine transparent areas with printed areas to create contrast and make the most of the internal lighting
  • Use designs with different levels of opacity to create a sense of depth when the light is on
  • Create themed collections for weddings, births, business decoration or personalised gifts

 

MEASUREMENTS

Frames

Ref. 058076 058075 058092 058077 058094
Colour White White Light oak White Light oak
Sheet (cm) 15 x 15 15 x 20 15 x 20 20 x 25 20 x 25
Exterior (cm) 16 x 15.9 x 5.5 16.6 x 20.9 x 5.5 16.6 x 25.8 x 4.5 21.6 x 26 x 5.5 25.6 x 26 x 4.5
Interior (cm) 14.1 x 13.5 x 4 14.2 x 18.5 x 4 14.1 x 18.4 x 3 19.2 x 23.5 x 4 19.3 x 23.5 x 3
Slot (cm) 15.5 x 0.6 15.5 x 0.6 15.5 x 0.6 20.4 x 0.6 20.4 x 0.6
LED strip (cm) 43 x 0.5 56 x 0.5 55.5 x 0.5 70.5 x 0.5 70.5 x 0.5
Cable (cm) 150 150 150 150 150
Packing (cm) 17 x 18 x 6.5 17.5 x 22.2 x 6.5 17.8 x 22.2 x 5.5 22.5 x 27.5 x 6.5 22.5 x 27.5 x 5.8
Net weight (g) 338 390 349 506 451
Gross weight (g) 393 454 404 582 545

Acrylic sheets

Ref. 053661 053660 058718
Print area (cm) 15 x 15 15 x 20 20 x 25
Digital format 1:1 4:3 5:4
Thickness (mm) 5 5 5
Packing (cm) 15.5 x 23.3 x 0.8 17.3 x 24.3 x 0.6 26 x 37 x 0.6
Net weight (g) 112 164 273
Gross weight (g) 205 196 350

 

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.

  • Print the design in direct mode
  • Heat the press to 190 ºC
  • Place the printed paper (face up) on the base of the press
  • Place the sheet on top of the paper with the white side facing the print
  • Secure it with heat-resistant adhesive tape
  • Turn the sheet over, leaving the adhered paper facing the heat plate. Cover it with protective paper
  • Set the press to medium-low pressure and 70-110 seconds
  • Once finished, carefully remove the sheet using a protective glove
  • Allow it to cool and insert it into the frame through the slot

 

ASSEMBLY INSTRUCTIONS

  1. Sublimate the acrylic sheet
  2. Insert the sheet into the frame slot
  3. Connect the USB cable and switch on the LED light
  4. Select the type of light and adjust the brightness
  5. Hang the frame on the wall or place it on a surface

 

RELATED POSTS

Create your own product catalogue automatically like this

Photo frames: the product your business needs

Additional Information
Ref. 956020

Reviews

Share your opinion

It will only take a minute, and your opinion can help other customers.

Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0 reviews
5
0
4
0
3
0
2
0
1
0

Questions

No questions found for this product.

Be the first to ask a question!