More information about the Inkjet Transfer Paper for Light Textiles - Poli-tape Poli-Trans 300 

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Transfer parameters

> Application instructions

> Washing recommendations

> Technical data sheet

> Related posts

DESCRIPTION

• Transfer for customising t-shirts, sweatshirts, caps, tote bags... white or light-coloured with an inkjet printer
• Printable side is matte white. Reverse side with grid
• Prints with intense colours and wash-resistant. Soft to the touch
• Easily cut with scissors
• Easy to use: print, cut, and iron

THINGS TO KEEP IN MIND

• Not suitable for cutting with a plotter, the material may tear
• Cut around the design before ironing. During transfer, the entire paper adheres, including non-inked parts, which may leave a visible edge or background if not cut
• The paper should be placed in the printer with the printable side facing up

TIPS AND ADVICE

• Opt for designs with simple shapes like squares, rectangles... These facilitate cutting excess paper and improve the integration of the design on the garment
• Use the finishing sheet for a more durable and wash-resistant print. Available in Related Products

TRANSFER PARAMETERS

• Temperature: 175 °C
• Time: 15 seconds
• Pressure: 5 bar [high pressure]

APPLICATION INSTRUCTIONS

• Print the design in mirror mode*
• Allow the ink to dry 10 minutes after printing
• Cut around the design with scissors to remove the unprinted background
• Heat the iron to 175 ºC
• Pre-iron the garment for 4-5 seconds to remove wrinkles and moisture
• Place the design on the garment with the printed side facing down. Secure it with thermal adhesive tape
• Cover with the protective paper or finishing sheet
• Iron at high pressure for 15 seconds
• Remove the paper while hot
• Cover the print again with finishing sheet and iron for 5-6 seconds**
• Remove the finishing sheet and gently stretch the garment widthwise for a softer feel

* Select normal paper mode and photo quality on your inkjet printer

** It is recommended to perform this step for a more wash-resistant print

WASHING RECOMMENDATIONS

• Wash the garment inside out in the washing machine at a maximum temperature of 40ºC 
• Use of a tumble dryer is not recommended
• Iron inside out

TECHNICAL DATA SHEET

Inkjet Transfer Paper for Light Backgrounds - Poli-Trans 300 by Poli-tape (.pdf - 0.05 MB)

RELATED POSTS

Which type of transfer paper should I use?

Textile transfer paper: Easily customise with your home inkjet printer

Can I use a domestic iron to apply a transfer?

Problems and solutions for applying transfer paper