The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
SUBLI-FLEX 202 is a high-stretch sublimation vinyl (270 gsm) for textile transfer on 100%cotton, denim and leather.
Printable on its matte side
It has an opaque white layer on which the inks are sublimated during the garment transfer process. This layer prevents the inks from getting lost on dark fabrics
Comes with a liner
The 25-metre roll has a Ø7.5 cm cardboard core
You can give it a matte finish with protective paper Ref. 036247 which you can find in Related Products
Made in Germany by Forever
THINGS TO KEEP IN MIND
We recommend cutting the white unprinted edges of the vinyl because they will be visible on dark garments
After printing the vinyl with sublimation ink, it should be left to dry. Transfer it to the garment once the ink is dry to the touch
Print it using registration marks to cut it with a cutting machine
TRANSFER PARAMETERS
Temperature: 180ºC
Time:
15 seconds (heat transfer)
30 seconds (dye sublimation)
Pressure: 5.0 bar [high pressure]
APPLICATION INSTRUCTIONS
Print the design in mirror image on vinyl
Let the ink dry
When the ink is dry to the touch, cut the edges of the design with a cutting machine or scissors
Weed out your excess vinyl
Preheat the press to 180ºC
Pre-press the garment for 4-5 seconds to remove wrinkles and moisture from the fabric
Place the vinyl with the printed side on the garment
Cover the vinyl with 5-10 sheets of protective paper. This will prevent any bubbles
Press for 15 seconds, high pressure
Cool peel the liner
Press again for 30 seconds with the same parameters
APPLICATION INSTRUCTIONS FOR A MATTE FINISH
Print the design in mirror image on the vinyl. Let the ink dry for 48-72 hours
Cut the edges of the design with a cutting machine or scissors
Weed out your excess vinyl
Preheat the press to 180ºC
Pre-press the garment for 4-5 seconds to remove wrinkles and moisture from the fabric
Place the vinyl with the printed side on the garment
Cover the vinyl with 5-10 sheets of protective paper. This will prevent any bubbles
Press for 15 seconds, high pressure
Cool peel the liner
Place protective paper over the vinyl and press again for 30 seconds with the same parameters
WASH RESISTANCE
Washing resistance: 40ºC max
Wash inside out in cold water
Air dry
Can be ironed by covering the print with protective paper