More information about the Craft Express Heat Press for Balls

INDEX

> Features

> Things to keep in mind

> User manual

> Instructions for use

> Measurements and technical data

> Certificates

> Warranty

FEATURES

• Designed for sports balls: allows you to personalise inflatable balls such as footballs (size 5), basketballs (size 7), rugby balls (size 9), and volleyballs (size 5)
• Stable structure: metal, with an ABS plastic outer casing that provides stability during pressing
• Concave heat plate: better adapts to the surface of the ball to apply the design with heat and pressure
• Lower support for the ball: keeps the ball in place during application and facilitates design positioning
• Manual pressure adjustment: via the top wheel to adapt the pressure to the type of ball and material used
• Temperature and time control: with digital panel for precise adjustment. Allows switching from ºC to ºF
• Usage counter: shows the number of applications performed
• Versatile: suitable for personalisation by sublimation, DTF, heat transfer vinyl, transfers...
• Audible alert: the machine emits a beep when there are 5 seconds of pressing time remaining

THINGS TO KEEP IN MIND

• Before personalising, check that the ball can withstand heat transfers
• Adjust the pressure carefully to avoid deforming the ball during pressing

USER MANUAL

Craft Express Ball Heat Press Manual (.pdf - 1.9 MB).

INSTRUCTIONS FOR USE

1. Place the design on the ball and secure it with heat-resistant tape
2. Adjust the pressure using the top wheel according to the type of ball and its inflation level
3. Plug in the heat press and switch it on
4. Press the temperature adjustment button and use the + and − buttons to set the desired value. Press the button again to confirm. To switch between °C and °F, press the C/F button
5. Press the time adjustment button and use the + and − buttons to set the duration. Press the button again to confirm
6. Wait for the heat press to reach the set temperature and place the ball on the base support
7. Lower the handle: the countdown will start automatically
8. When you hear the beep in the last 5 seconds, get ready to remove the ball
9. At the end of the countdown, lift the handle and carefully remove the ball

MEASUREMENTS AND TECHNICAL DATA

CERTIFICATES

• CE Certification in compliance with EU regulations

WARRANTY

• As stipulated by law in: Terms and Conditions