More information about the Basic Metallic Embroidery Vinyl

INDEX

> Description

> Things to keep in mind

> Usage instructions

> Washing recommendations

DESCRIPTION

• Can be applied directly onto the garment or embroidered onto fabric pieces to create patches and then affixed
• Easy to cut. Embroider a cord or satin stitch around the outline. Remove excess vinyl by stretching it with your hands
• No cutting tools required (plotter, cutter, laser machine...)
• Pelltex fabric provides stability to the embroidery, eliminating the need for interfacings

THINGS TO KEEP IN MIND

• To apply the embroidered patch, you can use a heat-adhesive sheet and affix it to the garment with heat. See Related Products
• The length and/or width of some rolls may vary slightly. However, the working area will always be equal to or greater than sold: 48 × 68 cm = 3,264 cm²

USAGE INSTRUCTIONS

• Embroider a contour cord or satin stitch
• Use needles of Nm 70 or 75 and slightly increase the stitch density on this cord
• Apply the heat-adhesive sheet before trimming the vinyl (optional)
• Make a small cut with scissors at the starting point of the patch and stretch the excess
• Peel off manually along the edge of the patch, using both hands

WASHING RECOMMENDATIONS

• Wash inside out at a maximum temperature of 60 ºC
• Air dry
• Iron at low temperature
• Do not use bleach or chlorine
• Do not dry clean