More information about BASIC Embroidery Vinyl

INDEX

> Description

> Things to keep in mind

> Instructions for use

> Washing recommendations

DESCRIPTION

• Can be applied directly onto the garment or embroidered onto fabric pieces to create patches and then affixed
• Provides stability to the embroidery, eliminating the need for interfacings
• Easy to cut. Embroider a border or satin stitch around the edge. Remove excess vinyl by stretching it with your hands
• No cutting tools required (plotter, cutter, laser machine...)
• The visible side of the patch is matte, without texture

THINGS TO KEEP IN MIND

• To apply the embroidered patch, you can use a heat adhesive sheet and fix it to the garment with heat. See Related Products
• Some vinyls come with a white protective paper. It must be removed before use
• The length and/or width of some rolls may vary slightly. However, the working area will always be equal to or greater than the sold size: 48 × 68 cm = 3,264 cm²

INSTRUCTIONS FOR USE

• Embroider a border or satin stitch
• Use needles of Nm 70 or 75 and slightly increase the stitch density in this border
• Apply the heat adhesive sheet before cutting the vinyl (optional)
• Make a small cut with scissors at the starting point of the patch and stretch the excess
• Peel off by hand along the edge of the patch, using both hands

WASHING RECOMMENDATIONS

• Wash inside out at a maximum temperature of 60 ºC
• Air dry
• Iron at low temperature
• Do not use bleach or chlorine
• Do not dry clean