More information about the 3D Effect Textile Vinyl Brick from Siser

INDEX

> Description

> Things to keep in mind

> Certificates

> Technical characteristics

> Plotter cutting parameters

> Transfer parameters

> Application instructions

> Washing recommendations

> Storage recommendations

> Technical sheet

DESCRIPTION

• Flexible vinyl ideal for adding a three-dimensional effect to caps, t-shirt logos, tote bags... Soft to the touch
• Can be cut with a plotter and laser machine

THINGS TO KEEP IN MIND

• No Blockout: in dark polyester textiles the base color could migrate and affect the shade of the vinyl during transfer
• The front of the vinyl is on the inside of the roll

CERTIFICATES

• VeganOK: guarantees that the raw materials used are not of animal origin and are cruelty-free
  
• REACH No. 1907/2006/EU: ensures the absence of hazardous chemicals
  
• Oeko-Tex Standard 100 Class II: confirms it is suitable for textiles in contact with the skin

TECHNICAL CHARACTERISTICS

(*) Allows another layer of vinyl to be applied on top to create composite multicolour designs

PLOTTER CUTTING PARAMETERS

• Cutting blade: 60º
• Pressure: 80 gf (600µ) and 150 gf (1000µ)
  
• Speed: 10 cm/second

TRANSFER PARAMETERS

• Temperature: 155 ºC
• Time: 25 seconds
• Pressure: 3/4 bar [medium-high pressure]

APPLICATION INSTRUCTIONS

• Cut the design in mirror mode with a cutting plotter
• Remove excess vinyl (weeding)
• Heat the press to 155 ºC
• Place the garment on the press and pre-press for 20 seconds to remove wrinkles and moisture from the textile
• Place the vinyl on the garment and protective paper over the vinyl
• Press with medium-high pressure for 20 seconds
• Let it cool and remove the liner
• Press again for 10 seconds with the same parameters

WASHING RECOMMENDATIONS

• Hand wash or machine wash at a maximum temperature of 40º
• Do not bleach or dry clean
• Air dry or use a cotton cycle dryer
• Iron at a low temperature
• Wait 24 hours before the first wash
• If ironing, it is better to turn the garment inside out

STORAGE RECOMMENDATIONS

• Store in dust-free areas without direct exposure to sunlight
• Storage temperature: between 18 and 26 ºC
• Shelf life: 2 years

TECHNICAL SHEET

Brick Technical Sheet (.pdf - 1.76MB)