DTF Transfer & Vinyl Lift Off Remover

More information about the DTF transfer and Vinyl Lift Off Remover

• Very useful to solve printing mistakes. Also to renew the look of the garment with another one
• It does not stain and dries quickly
• Can be applied on most fabrics (e.g. non-waterproof nylon, 50-100% cotton, etc.), except those containing acetate
• Based on our tests, we do not recommend using this product to remove designs applied using other techniques, such as sublimation or screen printing

COMPOSITION

• Methyl acetate (79-20-9)
• 1,3-Dioxolane (646-06-0)
• Does not contain chlorinated solvents

INSTRUCTIONS FOR USE

• Unscrew the cap of the VLR vinyl remover bottle and pierce the inner cap
• Apply a few drops of the remover to the back of the vinyl you want to remove
• Leave on for a few seconds
• Remove the vinyl using a hook or tweezers. For the DTF film, it is recommended to use a spatula
• Flip the fabric and pour a few more drops on the front. Rub with a cloth until all residue has been completely removed
• Let the garment dry before applying the new vinyl film

RECOMMENDATIONS FOR USE

• The vinyl remover is flammable and should therefore be applied in ventilated areas with no ignition sources
• It is advisable to use a mask, gloves, and goggles during the application, especially for people who are particularly sensitive or allergic to chemicals. The liquid and its vapours may cause eye and respiratory irritation
• Keep the bottle tightly closed after use. It should not be left open between applications

IMPORTANT INFORMATION

• Safety data sheet: VLR heat transfer vinyl remover (.pdf - 301 kB)

DIMENSIONS