More information about the Teflon Strips for Graphtec Vinyl Cutters

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Measurements

> Precautions

> How to replace the cutting strip

> Related posts

DESCRIPTION

• Teflon strips with adhesive backing for application on the cutting base
• Easily adheres to the surface
• Heat and cut resistant
• Can be cut to the desired size

THINGS TO KEEP IN MIND

• The replacements are suitable for all plotters with the same strip size from the mentioned brands
• The strips have a protective paper. Remove it to adhere to the surface
• To adhere the strip to the plotter, ensure the surface is clean and dry

TIPS AND ADVICE

• Replace this part periodically to maintain the quality of your cutting work. Scratches can affect the cutting quality

MEASUREMENTS

PRECAUTIONS

• Disconnect the power supply of the plotter before replacing the cutting strip
• Be careful when replacing it to avoid cutting your hands
• Move the blade holder carriage to a position that facilitates your work
• Apply so that it is not bent or twisted, as this could affect the cutting quality
• Ensure there are no foreign objects or air bubbles on the base surface, as they could affect the cutting quality

HOW TO REPLACE THE CUTTING STRIP

• First, remove the used strip from the right side to the left
• Once removed, ensure there are no adhesive tape or glue residues on the cutting base
• Attach the new strip from the left side to the right while gradually peeling off the adhesive backing

RELATED POSTS

The Teflon Strip of the Plotter and its Replacement