More information about the Sublimation Plush Cushion Covers with Coloured Back

INDEX

> Description

> Things to keep in mind

> Measurements

> Washing recommendations

> Recommended sublimation instructions and parameters

DESCRIPTION

CASES

• Zip closure in the same colour as the back
• Includes a tag designed by Brildor with a 3 x 2 cm space to print your company or shop logo or identification. It can be trimmed to only show your business identification
• Can also be customised with other techniques such as embroidery, screen printing, transfer, rhinestones and textile vinyl

FILLINGS

• Non-woven fabric exterior (TST), 100% polypropylene
• Hollow conjugated siliconised fibre interior, 100% polyester
• Increase the volume or firmness of the filling by purchasing fibre separately. See in Related Products
• Delivered vacuum-packed

THINGS TO KEEP IN MIND

• Before sublimating, note that the colours of the back of the case will blend with those of the image you wish to print, altering its tone. It is recommended to personalise with dark colours to minimise this effect

MEASUREMENTS

CASES

FILLINGS^(*)

^(*) Not included with the pillowcase, must be purchased separately

WASHING RECOMMENDATIONS

• Suitable for machine washing at a maximum temperature of 40º
• Do not bleach or dry clean
• Air dry preferably

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters provided as guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the case on the press base and pre-press for 5-10 seconds to remove wrinkles
• Insert protective paper inside the case to avoid staining the other side
• Place the printed design on the case and secure it with heat-resistant tape
• Close the press with medium pressure for 35-45 seconds
• Use a protective glove to remove the freshly sublimated case
• Carefully remove the paper
• Repeat the same process to sublimate the other side of the case