
Sublimation PET Luggage Tags
Luggage tags for suitcases, customisable on both sides by dye sublimation or laser printing.
- Pre-cut on A4 PET sheet with matte finish
- Each A4 sheet contains 4 tags
- Print area: 6 x 14 cm

More information about the Sublimation PET Luggage Tags
INDEX
> Recommendations for the laser printing
> Recommended instructions and parameters for sublimation printing
> Recommended environmental conditions
DESCRIPTION
- Perforated and ready to personalise
- Perfect for suitcases, bags travel cases, computer cases...
- Made of plastic opaque very resistant
- Printed on both sides, both monochrome and in full colour
- No lamination required
- Waterproof. Water repellent grease and water
- Printable by heat transfer as well as with toner dry: laser, LED (without oil fuser) and fast fusing
THINGS TO KEEP IN MIND
- Estimated shelf life: 24 months from delivery, provided storage conditions are met
- It is possible to print a few or many sheets at a time. Maximum sheet volume will depend on the printer used
TEMPLATES FOR CUSTOMISATION
To facilitate the work of design and printing it is advisable to use the following templates available at PDF version (for use as layer in Photoshop) and in AI version (requires using the latest version of Adoble Illustrator):
DIMENSIONS
Format sheet (DIN | cm) | DIN A4 | 21 x 29,7 |
Thickness (μ) | 195 |
Weight (g/m2) | 260 |
Label (cm) | 5 x 23,9 |
Label closing hole (cm) | 1,2 x 5,3 |
Area printable (cm) | 6 x 14 |
RECOMMENDATIONS FOR LASER PRINTING
- In order to make it easier to remove the labels from the sheetTo make it easier to remove the labels, fold the pre-cut lines in all directions.
- Read the user manual and make tests to determine the most suitable configuration of the laser printer. Considering: printing volume, thickness and weight of the paper thickness and weight, types of trays available...
- The sheets should be at the printing site at least 24 hours before the start of the job, in order to adapt to the temperature and humidity conditions humidity
- For optimal results, always print at actual size. Never adjust or fit the image on the sheet
- The parameters recommended print page scaling are: PDF => NONE and AI => DO NOT CHANGE SCALE.
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given as a guide only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print the design in mode mirror
- Preheat the press to 180 ºC
- Place the sheet on the lower platen of the press
- Place on the sheet the design previously printed and fix it with heat tape to prevent it from moving
- Place protective paper
- Close the press at medium pressure for 60 seconds
- With the help of a protective glove, remove the newly printed sheet the freshly printed
- Carefully peel off the paper
- Fold along the pre-cut lines for easy removal of the newly sublimated name tags
RECOMMENDED ENVIRONMENTAL CONDITIONS
Temperature (min|max) | Humidity (min|max) | |
At the printing site | 10 ºC | 30 ºC | 40% RH | 55% RH |
In use | -40 ºC | 120 ºC | 10% RH | 100% RH |
In storage | 10 ºC | 20 ºC | 20% RH | 55% RH |
Ref. | 951881 |
---|---|
Dimensions (mm) | 50 x 239 |
Print area (mm) | 60 x 140 |
Colour | White |
Items | Badges, Insignias |
Marking techniques | Dye sublimation, Laser engraving |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!