Search
Sublimation Neck Warmers - 25 x 50 cm - Pack of 10 units
Neck warmers you can personalise using sublimation printing, embroidery, rhinestones, transfer, textile vinyl and screen printing. You may use it as a scarf, bandana, turban, ponytail holder or as a face mask for the mouth and nose.
- Made of polyester with a grammage of 130 g/m2
- Flexible, fresh, lightweight and very soft.
- Sale unit: 10-neck-warmer pack.
- Print area (per side): 25 x 50 cm
Availability:
Shown on each product
Please, give us an estimate of the quantity you need:
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Related Products
![[ESP]](https://www.brildor.com/media/catalog/product/cache/26d5f9905d0a4af504fa667461a392e0/p/a/xpapel-sublimacion-adhesivo-rollo-texprint-tt.jpg.pagespeed.ic.j33RGMvyy8.jpg)
More information about 25x50cm neck warmers for sublimation
- Buff for the neck or head with multiple uses.
- Perfect as birthday gifts, stag and hen parties, or organised trips.
- Dries quickly. Does not absorb any moisture.
- It has the shape of a tubular scarf, with no side or edge seams. Open on its ends to insert the head.
- Customisable on its entire surface.
- Before sublimating these coloured neck warmers, it must be taken into account that, their colours will be mixed with those of the image to be printed. The original colours of the image may change. A way to minimise this effect is to choose designs with dark colours or black.
DIMENSIONS (APPROX.)
| Neck warmer |
25 x 50 cm |
| Grammage | 130 g/m2 |
| Print area per side |
25 x 50 cm |
| Pack | 25.5 x 14 x 3.3 cm |
WASHING RECOMMENDATIONS
- Machine wash at a maximum temperature of 40ºC, preferably using a program for delicate laundry.
- Do not use bleach.
- Iron at a maximum temperature of 110ºC.
- Do not dry-clean.
- Do not tumble dry.
Recommended instructions and parameters for sublimation printing
- Print the design in mirror image.
- Preheat the press to 200ºC.
- Place a piece of paper or of thin cardboard inside the neck warmer to prevent colour transferring from one side to the other.
- Place the neck warmer on the press' lower plate and the paper's printed side against it.
- Close the press at medium pressure for 35-55 seconds.
- Using a protective glove, remove the newly printed neck warmer.
- Repeat this same procedure if you want to sublimate the other side.
| Ref. | 926475 |
|---|---|
| Dimensions (mm) | 250 x 500 |
| Print area (mm) | 250 x 500 |
| Colour | Black, Grey, Orange, Pink, Red, White, Yellow |
| Items | Neck warmers |
| Garment composition | Polyester |
| Marking techniques | Dye sublimation, Embroidery, HTV, Rhinestones, Screen printing, Transfer paper, Transfer sheets |
Post your question