More information about textured wooden fridge magnets for sublimation

ÍNDICE

> Description

> Templates for personalisation

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPCIÓN

• White coating with a rough texture suitable for sublimation printing. Following the same process used for smooth surfaces, you will obtain excellent results with an original finish
• Rounded corners and edges
• Includes an adhesive magnetic holder to fix on the magnet base once personalised

TEMPLATES FOR PERSONALISATION

• Download the template to personalise the base of the square magnet (.eps - 1.245 kb).
• Download the template to personalise the base of the rectangular magnet (.eps - 1.273 kb).

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mirror image
• Preheat the press to 200 ºC
• Place the magnet base on the press' lower plate and the paper's printed side against it. Fix with heat resistant tape
• Close the press at medium-heavy pressure for approximately 70 seconds
• Using a protective glove, remove the newly printed magnet base
• Remove the paper carefully
• Place the magnetic holder on the magnet base when it has cooled down