
Sublimable Fridge Magnets - MDF3 - Geometric Shapes
Fridge magnets with geometric shapes customisable by sublimation.
- MDF wood 3 mm thick, glossy finish
- Includes magnet with adhesive

More information about the Sublimable Fridge Magnets - MDF3 - Geometric Shapes
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- White sublimatable side. Rear light or dark brown, depending on the lot
- Magnetic foil with adhesive to fix to the wood once sublimated
- Can also be personalised with laser engraving
THINGS TO KEEP IN MIND
- The customisable side has a protective film that needs to be removed before sublimating. The film on some magnets includes an additional layer of paper to further protect the surface. Easily removable
- Replacement magnet sheets can be purchased at Related Products
DIMENSIONS
Reference no | 051062 | 039085 | 051063 | 051059 | 051060 | 038299 | 039817 | 041086 | 039084 | 051061 | 039818 |
Shape | Round | Round | Round | Square | Square | Square | Square | Hexagon | Rectangular | Rectangular | Rectangular |
Print area (cm) |
Ø5 | Ø6 | Ø7 | 5 x 5 | 6 x 6 | 7 x 7 | 10 x 10 | 7 x 6 | 6 x 8 | 9 x 12 |
10 x 15 |
Thickness (mm) |
3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
3 |
Magnet (mm) |
25 x 25 |
25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 |
Magnet weight (g) |
10 |
13 | 16 |
11.5 |
16.4 |
20 | 35 | 11 |
20 | 48.8 |
55 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print the design in mirror image
- Preheat the oven to 180ºC
- Peel off the transparent film protecting the magnet’s printable side
- Place the magnet on the lower platen of the press and the paper's printed side against it. Fix them with heat-resistant tape
- Press for 60 seconds, medium pressure
- With the help of a protective glove, remove the finished sublimated magnet
- Carefully peel off the paper
- Remove the protective paper from the adhesive sheet and stick it to the back of the magnet
Ref. | 926296 |
---|---|
Thickness (mm) | 3 |
Surface material | Wood |
Items | Magnets, Sheets |
Accessory details | Magnet |
Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!