Loading..

Product was successfully added to your shopping cart.
€2.49

Sublimation Face Mask - 3D - Memory Foam Fabric

Ref. 039428

Sublimation Face Mask - 3D - Memory Foam Fabric

  • Sublimation Face Mask - 3D - Memory Foam Fabric - Example of use and personalisation
  • Sublimation Face Mask - 3D - Memory Foam Fabric - Personalised example
  • Sublimation Face Mask - 3D - Memory Foam Fabric - Filter pocket
  • Sublimation Face Mask - 3D - Memory Foam Fabric - Outer details
  • Sublimation Face Mask - 3D - Memory Foam Fabric - Inner details
€2.49

Sublimation Face Mask - 3D - Memory Foam Fabric

Ref. 039428

Reusable face mask with front seam you can personalise using sublimation printing, embroidery, rhinestones, transfer, textile vinyl and screen printing. With a flexible nose wire for a perfect fit.

  • Made of memory foam on its outer layer and double cotton fabric on the inside to insert filters.
  • Includes 2 cord locks to adjust the ear loops.
  • Print area (per side): 10.1 x 12.5 cm.

More information

How to sublimate this mask?

+ Read More
- Read Less
Availability:
  • Immediate: 236 units
  • If you want to schedule an order that exceeds our TOTAL availability, please contact customersupport@brildor.com including the reference of the product you are interested in. This does not apply to products in the outlet section.

€2.49
/ Each Unit VAT not included
  • Buy 10 for €2.29 each
  • Buy 100 for €1.99 each

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Sublimation Face Mask - 3D - Memory Foam Fabric Description

More information about the 3D memory foam face mask for sublimation

  • Made of viscoelastic material. Comes back to its original form after stretching, without losing its shape.
  • Spongy texture on the edges, very comfortable and pleasant to the touch.
  • With an inner pocket made of cotton to insert a protection filter (not included).
  • Protects from the natural act of touching your face and from breathing dust, pollen or other particles found in the air.
  • Includes 2 white silicone cord locks, to adjust the mask to the face quickly and easily.
  • Reusable, provided it is properly sanitised after each use.
  • Suitable for sublimation on all its outer area. For optimal results, we recommend the use of a template available below.
  • Due to the mask's ergonomic shape, it is necessary to split the sublimation process in two, printing one side first and then the other. For this to be done, you must fold the mask at its front seam and insert it inside the press. Make sure the ear loops are protected in order to avoid possible staining.

HOW TO PLACE CORD LOCKS ON FACE MASKS?

  • After the sublimation process is complete, thread a needle and insert it through the small hole in the adjuster.
  • Circle the ear loop with the needle and pass it through the hole in the opposite direction.
  • Pull carefully.
  • Once the ear loop passes to the other side, remove the needle and adjust it to the size you want.

DIMENSIONS (APPROX.)(*)

Folded
10.1 x 12.5 cm
Unfolded 17.7 x 12.5 cm
Print area (per side)
10.1 x 12.5 cm

(*) These values are approximate and are provided as a guide. Some slight variations may occur as a result of normal irregularities in the manufacturing process.

DOWNLOADABLE TEMPLATE

Customisable Memory Foam Face Mask Template (.psd - 841 kB)

WASHING RECOMMENDATIONS

  • Wash before use.
  • Can be washed up to 25 times without losing its properties.
  • It is recommended to machine wash at a maximum temperature of 40°C.
  • Leave to dry completely after each wash.
  • Do not dry-clean.
  • Do not use bleach.

RECOMMENDATIONS FOR USE

  • To ensure its effectiveness, the mask should not be in contact with unclean garments or handled with dirty hands.
  • Personal use only.
  • Do not use for more than 4 hours.
  • Do not reuse a wet or dirty mask.
  • Avoid the contact of dirty masks with other clean clothes.
  • Store in a place where it cannot be contaminated.
  • Do not use if the fabric is damaged, torn or deteriorated.
  • Must be disposed of in closed containers with plastic bags.

Recommended instructions and parameters for sublimation printing

  • Print the design in mirror image.
  • Preheat the press to 200°C.
  • Put protective paper on the press' lower plate.
  • Fold the mask and place protective paper between the sides. Remember to protect the ear loops to avoid possible staining.
  • Place the folded mask on the press' lower plate and the paper's printed side against it. Fix it with heat-resistant tape, or use a temporary adhesive. Make sure you remove all of the wrinkles.
  • Cover the mask with protective paper and close the press at medium-heavy pressure for 45 seconds.
  • Using a protective glove, remove the newly printed face mask from the press.
  • Remove the paper carefully.
  • Repeat the same process with the other side of the mask.

IMPORTANT INFORMATION

Additional Information
Reference nº 039 428
Net Weight (kg) 0.016
Gross Weight (kg) 0.018
Billable Weight 0.0176
Dimensions (mm) 177 x 125
Print area (mm) 101 x 125
Thickness (mm) 2.58
Colour White
Surface material Fabric
Composition Cotton, Viscoelastic
Accessory details Border, Pocket
Marking techniques Sublimation, Embroidery, Transfer Paper, Rhinestones, Screen Printing, Textile Vinyl
Post your question

Questions and Answers

There are no entries.

Sublimation Face Mask - 3D - Memory Foam Fabric Description

More information about the 3D memory foam face mask for sublimation

  • Made of viscoelastic material. Comes back to its original form after stretching, without losing its shape.
  • Spongy texture on the edges, very comfortable and pleasant to the touch.
  • With an inner pocket made of cotton to insert a protection filter (not included).
  • Protects from the natural act of touching your face and from breathing dust, pollen or other particles found in the air.
  • Includes 2 white silicone cord locks, to adjust the mask to the face quickly and easily.
  • Reusable, provided it is properly sanitised after each use.
  • Suitable for sublimation on all its outer area. For optimal results, we recommend the use of a template available below.
  • Due to the mask's ergonomic shape, it is necessary to split the sublimation process in two, printing one side first and then the other. For this to be done, you must fold the mask at its front seam and insert it inside the press. Make sure the ear loops are protected in order to avoid possible staining.

HOW TO PLACE CORD LOCKS ON FACE MASKS?

  • After the sublimation process is complete, thread a needle and insert it through the small hole in the adjuster.
  • Circle the ear loop with the needle and pass it through the hole in the opposite direction.
  • Pull carefully.
  • Once the ear loop passes to the other side, remove the needle and adjust it to the size you want.

DIMENSIONS (APPROX.)(*)

Folded
10.1 x 12.5 cm
Unfolded 17.7 x 12.5 cm
Print area (per side)
10.1 x 12.5 cm

(*) These values are approximate and are provided as a guide. Some slight variations may occur as a result of normal irregularities in the manufacturing process.

DOWNLOADABLE TEMPLATE

Customisable Memory Foam Face Mask Template (.psd - 841 kB)

WASHING RECOMMENDATIONS

  • Wash before use.
  • Can be washed up to 25 times without losing its properties.
  • It is recommended to machine wash at a maximum temperature of 40°C.
  • Leave to dry completely after each wash.
  • Do not dry-clean.
  • Do not use bleach.

RECOMMENDATIONS FOR USE

  • To ensure its effectiveness, the mask should not be in contact with unclean garments or handled with dirty hands.
  • Personal use only.
  • Do not use for more than 4 hours.
  • Do not reuse a wet or dirty mask.
  • Avoid the contact of dirty masks with other clean clothes.
  • Store in a place where it cannot be contaminated.
  • Do not use if the fabric is damaged, torn or deteriorated.
  • Must be disposed of in closed containers with plastic bags.

Recommended instructions and parameters for sublimation printing

  • Print the design in mirror image.
  • Preheat the press to 200°C.
  • Put protective paper on the press' lower plate.
  • Fold the mask and place protective paper between the sides. Remember to protect the ear loops to avoid possible staining.
  • Place the folded mask on the press' lower plate and the paper's printed side against it. Fix it with heat-resistant tape, or use a temporary adhesive. Make sure you remove all of the wrinkles.
  • Cover the mask with protective paper and close the press at medium-heavy pressure for 45 seconds.
  • Using a protective glove, remove the newly printed face mask from the press.
  • Remove the paper carefully.
  • Repeat the same process with the other side of the mask.

IMPORTANT INFORMATION

Additional Information

Reference nº 039 428
Net Weight (kg) 0.016
Gross Weight (kg) 0.018
Billable Weight 0.0176
Dimensions (mm) 177 x 125
Print area (mm) 101 x 125
Thickness (mm) 2.58
Colour White
Surface material Fabric
Composition Cotton, Viscoelastic
Accessory details Border, Pocket
Marking techniques Sublimation, Embroidery, Transfer Paper, Rhinestones, Screen Printing, Textile Vinyl
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.