Sublimation Face Mask - 3D - Memory Foam Fabric

Reusable face mask with front seam you can personalise using dye sublimation printing, embroidery, rhinestones, transfer, HTV and screen printing.

  • Made of memory foam on its outer layer and double cotton fabric on the inside to insert filters.
  • Shapeable nose wire and 2 silicone cord locks to adjust the ear loops.
  • Print area (per side): 9.7 x 10 cm (kid size) or 10.1 x 12.5 cm (adult size)

More information

How to sublimate this mask?

Availability:
Shown on each product
Product
Price
Availability
Qty
Sublimation Face Mask for kids - 3D - Memory Foam Fabric Ref. 040081
Sublimation Face Mask for kids - 3D - Memory Foam Fabric
€2.39 VAT not included / Each Unit
  • Buy 10 for €2.09 each
  • Buy 100 for €1.89 each
Availability Inmmediate: 761 units
Sublimation Face Mask for adults - 3D - Memory Foam Fabric Ref. 039428
Sublimation Face Mask for adults - 3D - Memory Foam Fabric
€2.49 VAT not included / Each Unit
  • Buy 10 for €2.29 each
  • Buy 100 for €1.99 each
Availability Inmmediate: 637 units
View Price
VAT not included
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the 3D memory foam face mask for sublimation

  • Made of viscoelastic material. Comes back to its original form after stretching, without losing its shape.
  • Spongy texture on the edges, very comfortable and pleasant to the touch. Suitable for both adults and children.
  • With an inner pocket made of cotton to insert a protection filter (not included).
  • Protects from the natural act of touching your face and from breathing dust, pollen or other particles found in the air.
  • Includes 2 white silicone cord locks, to adjust the mask to the face quickly and easily.
  • Reusable, provided it is properly sanitised after each use.
  • Suitable for sublimation on all its outer area. For optimal results, we recommend the use of a template available below.
  • Due to the mask's ergonomic shape, it is necessary to split the sublimation process in two, printing one side first and then the other. For this to be done, you must fold the mask at its front seam and insert it inside the press. Make sure the ear loops are protected in order to avoid possible staining.

HOW TO PLACE CORD LOCKS ON FACE MASKS?

  • After the sublimation process is complete, thread a needle and insert it through the small hole in the adjuster.
  • Circle the ear loop with the needle and pass it through the hole in the opposite direction.
  • Pull carefully.
  • Once the ear loop passes to the other side, remove the needle and adjust it to the size you want.

DIMENSIONS (APPROX.)(*)

Reference no.
040081 039428
Folded
9.7 x 10 cm 10.1 x 12.5 cm
Unfolded 16 x 10 cm 17.7 x 12.5 cm
Print area (per side)
9.7 x 10 cm 10.1 x 12.5 cm

(*) These values are approximate and are provided as a guide. Some slight variations may occur as a result of normal irregularities in the manufacturing process.

DOWNLOADABLE TEMPLATE

WASHING RECOMMENDATIONS

  • Wash before use.
  • Can be washed up to 25 times without losing its properties.
  • It is recommended to machine wash at a maximum temperature of 40°C.
  • Leave to dry completely after each wash.
  • Do not dry-clean.
  • Do not use bleach.

RECOMMENDATIONS FOR USE

  • To ensure its effectiveness, the mask should not be in contact with unclean garments or handled with dirty hands.
  • Personal use only.
  • Do not use for more than 4 hours.
  • Do not reuse a wet or dirty mask.
  • Avoid the contact of dirty masks with other clean clothes.
  • Store in a place where it cannot be contaminated.
  • Do not use if the fabric is damaged, torn or deteriorated.
  • Must be disposed of in closed containers with plastic bags.

Recommended instructions and parameters for sublimation printing

  • Print the design in mirror image.
  • Preheat the press to 200°C.
  • Put protective paper on the press' lower plate.
  • Fold the mask and place protective paper between the sides. Remember to protect the ear loops to avoid possible staining.
  • Place the folded mask on the press' lower plate and the paper's printed side against it. Fix it with heat-resistant tape, or use a temporary adhesive. Make sure you remove all of the wrinkles.
  • Cover the mask with protective paper and close the press at medium-heavy pressure for 45 seconds.
  • Using a protective glove, remove the newly printed face mask from the press.
  • Remove the paper carefully.
  • Repeat the same process with the other side of the mask.

IMPORTANT INFORMATION

More Information
Ref. 927127
Accessory details Adjustment accessory
Marking techniques Dye Sublimation, Embroidery, Rhinestones, Textile Vinyl, Transfer Paper
Post your question