More information about the Sublimation Event Bracelets with Safety Clasp

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Perfect for handing out at events, festivals, fairs...
• Black safety clasp included. Prevents the wristband from opening once it is fastened to the wrist
• Sublimable on the entire surface (2 outer sides and 2 inner sides of the wristbands)
• Find more replacement security clasps in Related Products
• Can also be customised using other techniques: embroidery, rhinestones, DTF, textile vinyl, screen printing or DTG

THINGS TO KEEP IN MIND

• Before sublimating, you should bear in mind that the colours of the wristbands will mix with the colours of the image you want to print, changing its tone. One way to minimise this effect is to choose dark coloured designs
• The black wristband is not suitable for sublimation. It is recommended to use an alternative technique
• It is recommended to sublimate each side separately, covering the remaining part of the wristband with paper or tape so that it does not get smudged with ink
• It is necessary to remove the safety clasp to sublimate the ribbon. It slides in the opposite direction to the teeth on the inside, both to remove it and to attach it after personalisation

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters are given as a guide only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mode mirror
• Preheat the press to 200 ºC
• Remove the safety lock by pulling it out from the side opposite to the teeth on the inside
• Place the printed part of the paper on the wristband and fix it with thermal adhesive tape
• Close the press at medium-high pressure for 35 seconds
• With the help of a protective glove, remove the newly printed wristband the freshly printed
• Carefully peel off the paper