More information about the Sublimation Faux Leather Cushion Covers

INDEX

> Description

> Things to keep in mind

> Measurements

> Washing recommendations

> Recommended sublimation instructions and parameters

DESCRIPTION

COVERS

• Excellent for interior decoration due to their elegant and rustic finish
• Customisable over the entire surface on both sides
• Marled or melange fabric with a leather-like appearance. Does not wrinkle or crack
• Can also be customised with other techniques such as embroidery, rhinestones, transfer, vinyl, direct-to-garment printing (DTG) or screen printing

FILLINGS

• Exterior made of non-woven fabric (TST), 100% polypropylene
• Interior made of hollow conjugated siliconised fibre, 100% polyester
• Increase the volume or firmness of the filling by purchasing fibre separately. See in Related Products
• Delivered vacuum-packed

THINGS TO KEEP IN MIND

• Although fully customisable, it is recommended to leave 5 mm on the zipper side (the width of the seam) to avoid damage

MEASUREMENTS

COVERS

FILLINGS^(*)

^(*) Not included with the cushion cover

WASHING RECOMMENDATIONS

• Machine wash at a maximum temperature of 30 ºC
• Air dry
• Dry cleaning is not recommended

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Insert protective paper inside the cover to avoid staining the other side
• Place the cover on the press base and the printed side of the paper on the cover. Secure with heat-resistant tape
• Open the zipper, close the press, and sublimate at medium-high pressure for 40 seconds
• With the help of a protective glove, remove the freshly sublimated cover
• Carefully remove the paper