More information about Sublimable Plush Fabric Covers for Hot Water Bottles

INDEX

> Description

> Washing recommendations

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Suitable for most hot water bottles available on the market
• They are shaped like a sack and completely envelop the thermal bottle
• Visible seams only on the reverse side, where the opening and Velcro closure are located
• Soft and pleasant to the touch fabric. Helps to keep the water warm for longer
• Can also be customised with DTF, textile vinyl, embroidery, rhinestones, screen printing, DTG, and transfer

WASHING RECOMMENDATIONS

• Machine wash at a maximum temperature of 40 ºC
• Do not bleach or dry-clean
• Air dry preferably

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters provided as a guideline. They may vary due to factors such as the sublimation paper used, inks, or ambient temperature. Therefore, it is recommended to carry out preliminary tests.

• Print the design in mirror image
• Preheat the press to 200ºC
• Before sublimating the back, place a paper inside the flap to protect the rest of the cover
• Place the cushion cover on the lower platen of the press and the paper's printed side against it
• Close the press at a medium-high pressure for 40 seconds
• Remove the newly printed cover using a protective glove
• Peel off the paper carefully
• Repeat the same process to sublimate the other side