Sublimation Ceramic Coaster - Screw Top
Sublimation Ceramic Coaster - Screw Top
Coasters of ceramic in the shape of a sheet of bottle printable by dye sublimation printing.
Related Products
More information about the Sublimation Ceramic Coaster - Screw Top
INDEX
> Template to personalise this coaster
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Surface of ceramic surface of white gloss finish
- Edge with a slope and notches that simulate the shape of a sheet metal sheet bottle
- Includes cork sheet with adhesive to fix it to the base of the coaster
THINGS TO KEEP IN MIND
- To print the entire surface of the coaster, it is recommended to use a sublimation oven and heat shrink bags. This allows the edge to be printed more evenly
- If you wish to customise only the flat part of the coaster, you can do so with a heat press. It is recommended to make tests to adjust the parameters
- It is recommended to use a Nomex pad to achieve an even heat distribution, especially on the edges
SUBLIMATION STENCIL FOR SUBLIMATION
DIMENSIONS
| Coasters (cm) | Ø10,8 x 0,7 |
| Base cork (cm) |
Ø10,1 |
| Print area (cm) |
Ø10,8 |
| Weight (g) | 96 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given as a guideline. They can vary due to many factors such as the paper used, the inks or ambient temperature. For this reason, it is recommended to perform tests.
WITH A HEAT PRESS (DIRECT METHOD)
- Print the design in mode mirror
- Preheat the press to 180 °C
- Pre-press the coaster at 175 ºC with medium-high pressure for 5-10 seconds
- Place the Nomex pad on the base of the oven press
- Place the coaster with the white side facing upwards on the pad and the printed side of the paper on the coaster. Secure with heat adhesive tape
- Close the press with medium-high pressure for 200 seconds
- With the help of a protective glove remove the coaster from sublimated
- Carefully peel off the paper
- Once cool, adhere the cork sheet to coaster
WITH A HEAT PRESS (INDIRECT METHOD)
- Print the design in mode mirror
- Preheat the press to 175 ºC
- Pre-press the coaster at 175 ºC with medium-high pressure for 5-10 seconds
- Place the Nomex pad on the base of the press
- Place the printed side of the paper on the coaster and fix it with heat adhesive tape
- Place the coaster with the printable side down on the pad
- Close the press with medium-high pressure for 300 seconds
- With the help of a protective glove, remove the coaster
- Carefully peel off the paper
- Once cool, adhere the cork sheet to coaster
WITH A SUBLIMATION OVEN
- Print the design in mode mirror
- Heat the oven to 180-200 ºC
- Place the printed part of the paper on the coaster and fix it with thermal adhesive tape
- Place the coaster inside a heat shrink bag heat-shrinkable and peel it off with the heat gun
- Close the oven for 8-10 minutes
- With the help of a protective glove, remove the coaster from sublimated
- Carefully peel off the paper
- Once cooled, stick the cork sheet to coaster
RELATED POSTS
The big market for tourism and souvenirs: take advantage of it in your business from personalisation
| Ref. | 038603 |
|---|---|
| Net Weight (kg) | 0.098 |
| Gross Weight (kg) | 0.098 |
| Billable Weight (kg) | 0.108000 |
| Dimensions (mm) | Ø108 |
| Print area (mm) | Ø108 |
| Thickness (mm) | 4 |
| Colour | White |
| Surface material | Ceramic, Cork |
| Items | Coasters |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question