Sublimable Aluminium Wind Spinners
Sublimable Aluminium Wind Spinners
Wind spinners customisable on both sides by sublimation.
Its rings open to create a 3D effect that spins in the breeze.
- Flexible gloss white aluminium, 1 mm thick
- Swivel hook for hanging, included
Related Products
More information about Sublimable Aluminium Wind Spinners
CONTENTS
> Recommended sublimation instructions and parameters
DESCRIPTION
- Wind spinners ideal for decorating gardens, terraces, balconies or windows
- Circular design with a wavy contour and flexible rings that open to form a three-dimensional structure
- Top hole for attaching the included swivel hook. Allows it to move freely in the breeze, creating an eye-catching visual effect
- Bottom hole for adding pendants or other decorative ornaments. Not included
- Supplied completely flat inside a white cardboard envelope
PLEASE NOTE
- Both customisable sides are covered with a protective transparent film that must be removed before sublimating
- Wait until the piece has cooled completely before shaping it
- Open the rings gradually and carefully, without forcing them, until you achieve the desired 3D effect
CUSTOMISATION TEMPLATE
To view the template, open the PDF file using Photoshop. Remember to enable the layers:
Sublimable wind spinners template (.pdf - 1.3MB)
TIPS AND TRICKS
- Use the same design on both sides so that the personalisation remains as it spins, or combine two different designs
- Add pendants or lightweight decorations to the bottom hole to create unique wind spinners
WIND SPINNER ASSEMBLY
Once sublimated and completely cool:
- Hold the central part of the wind spinner
- Open the rings one by one, gently turning them to the sides
- Spread them out gradually until you achieve the desired 3D effect
- Attach the hook and hang it
MEASUREMENTS
| Wind spinner (cm) | Ø25 |
| Print area (per side) (cm) | Ø25 |
| Thickness (mm) | 1 |
| Holes (mm) | Ø3 |
| Hook (cm) | 2.7 x 9.2 x 0.2 |
| Packaging (cm) | 28.5 x 28 x 2.2 |
| Weight (g) | 215 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters are given for guidance only. We recommend carrying out prior tests to make the necessary adjustments before starting production.
- Print the design in mirror mode
- Heat the press to 180 °C
- Remove the transparent films protecting both sides of the wind spinner
- Place the wind spinner on the lower platen of the press and the printed side of the paper on the wind spinner
- Close the press at medium pressure for 60-80 seconds
- Using a protective glove, remove the freshly sublimated wind spinner
- Repeat the process on the other side of the wind spinner
- Carefully remove the paper
RELATED POSTS
The huge tourism and souvenir market: take advantage of it in your personalisation business
| Ref. | 955881 |
|---|---|
| Thickness (mm) | 1 |
| Surface material | Aluminium |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Questions
No questions found for this product.
Be the first to ask a question!