More information about the Sublimable Natural Linen Cushion Covers

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

COVERS

• Speckled raw colour covers
• Customisable on both sides from seam to seam
• Side zip closure in the same colour as the cover, very durable
• Can also be customised with embroidery, textile vinyl, DTF, screen printing, rhinestones DTG and transfer

PADS

• Exterior made of non-woven fabric (TST), 100% polypropylene
• Interior made of conjugated hollow siliconised fibre, 100% polyester
• Increase the volume or firmness of the filling by purchasing fibre separately. See in Related Products
• Delivered vacuum-packed

THINGS TO KEEP IN MIND

• Although it can be fully customised, we recommend leaving 5 mm at the zip side (the seam width) to avoid damage
• The cushion filling is slightly larger than the cover but fits correctly

MEASUREMENTS

COVERS

PADS^(*)

^(*) Not included with the cushion cover, purchased separately

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the cover on the lower plate of the press and the printed side of the paper on the cover. Secure them with heat-resistant tape to prevent movement
• Close the press with medium-high pressure for 60 seconds
• Using a protective glove, remove the freshly sublimated cover
• Carefully remove the paper