More information about the DM3 Sublimable Double-Sided Wooden Keyrings - Travel

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• With a sublimable coating on both sides in glossy white
• Black rounded edges
• Includes a metal ring and a plastic snap closure
• Can also be customised with other techniques such as laser engraving, adhesive vinyl and direct digital printing
  

THINGS TO KEEP IN MIND

• The customisable sides have a clear plastic protective film that must be removed before sublimation. The film on some keyrings includes an additional paper layer for extra surface protection. They can be easily removed

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters are provided as guidelines. It is recommended to conduct preliminary tests to make the necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 °C
• Remove the clear plastic protective film from one of the customisable sides of the keyring
• Place the keyring on the press base and the printed side of the paper on the keyring. Secure it with heat-resistant tape
• Close the press with medium pressure for 60 seconds
• Using a protective glove, remove the freshly printed keyring
• Carefully remove the paper
• Repeat the same process to sublimate the other side of the keyring if desired
• Attach the plastic closure with the ring to the keyring