More information about the Sublimable Magnets - Wood MDF3 - Rounded Edges

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Sublimable white face. Light or dark brown back, depending on the batch
• Magnetic adhesives to attach to each magnet after customisation. You can purchase more in Related Products
• Can also be customised with laser engraving, UV DTF, vinyl, transfer...

THINGS TO KEEP IN MIND

• The customisable face has a protective film that must be removed before sublimation. The film on some magnets includes an additional paper layer for further surface protection. It is easily removed

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 ºC
• Peel off the transparent plastic film protecting the sublimable face of the magnet
• Place the magnet on the press base and the printed side of the paper on the magnet. Secure them with heat-resistant adhesive tape
• Close the press with medium pressure for 60 seconds
• Using a protective glove, remove the freshly sublimated magnet
• Carefully remove the paper
• Remove the protective paper from the adhesive sheet and stick it to the back of the magnet