More information about the Sublimable Foldable Metal Bag Hangers

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Foldable hanger-type supports for bags with non-slip rubber on the back
• Magnetic closure on the sides for easy folding
• Only the white side of the plate is sublimable. Silver back is not sublimable
• The base of the bag hanger has an adhesive for attaching the personalised plate. Simply remove the protective paper and correctly centre the plate
• Can also be personalised with laser engraving
• Presented in a cardboard box

THINGS TO KEEP IN MIND

• The sublimable side of the plate is covered by a protective film. It must be removed before sublimation
• It is recommended to carefully attach the plate to the base. Once adhered, it may break if you try to remove it
• You can purchase more round sublimable aluminium plates separately

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 ºC
• Remove the protective plastic from the white side of the plate
• Place the plate on the lower platen of the press and the printed side of the paper on the plate
• Close the press at a medium pressure for 30 seconds
• Using a protective glove, remove the freshly printed plate
• Carefully remove the paper