More information about the Sublimable Double-sided Disc Keyrings

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Perfect as promotional keyrings for corporate events, Father's Day gifts, birthdays, communions...
• Outer ring made of zinc alloy, inner disc of black plastic, and black synthetic leather strap
• Only the white side of the 2 included aluminium plates is sublimable. Silver reverse is not sublimable
• Each side of the inner disc has adhesive to fix the personalised plates
• The disc rotates on itself, displaying the sublimated plates
• Presented in a cardboard box

THINGS TO KEEP IN MIND

• The customisable side of the plates has a protective film that must be removed before sublimation
• It is recommended to carefully fix the plates to the base. Once adhered, they may break if attempted to be removed

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 ºC
• Remove the protective film from the sublimable side of the plate
• Place the plate on the base plate of the press and the printed paper on top of the plate. Secure them with heat-resistant tape to prevent movement
• Close the press at medium pressure for 45 seconds
• With the help of a protective glove, remove the freshly sublimated plate
• Carefully remove the paper
• Remove the paper protecting the adhesive on the keyring disc. Centre the plate on it and fix it