Sublimable Bottle Opener
Bottle-shaped bottle opener, customisable on both sides by sublimation.
- 2 mm thick steel with a glossy white coating
- Ø4 mm hole for use as a keyring or pendant
- Printing area: 35 x 127 mm
Related Products
More information about the Sublimable Bottle Opener
INDEX
> Recommended Sublimation Instructions and Parameters
DESCRIPTION
- Perfect for customisation and offering as promotional gifts or souvenirs
- Customisable across its entire surface
TIPS AND ADVICE
- Customise them with your company name or logo for visibility or as an advertising tool
- Design unique gifts for special occasions by personalising them with original messages or representative images
CUSTOMISATION TEMPLATE
Bottle-shaped Bottle Opener (.jpg - 64Kb)
DIMENSIONS
| Print Area (cm) | 3.5 x 12.7 |
| Bottle Opener (cm) | 2.6 x 1.3 |
| Thickness (mm) | 2 |
| Hole Diameter (mm) | 4 |
| Weight (g) | 44 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
- Print the design in mirror mode
- Heat the press to 200 ºC
- Place the bottle opener on the base plate of the press with the printed paper on top. Secure it with heat-resistant tape
- Close the press at a medium-high pressure for 120 seconds
- Using a protective glove, remove the freshly sublimated bottle opener
- Carefully remove the paper
RELATED POSTS
| Ref. | 031077 |
|---|---|
| Print area (mm) | 35 x 127 |
| Thickness (mm) | 2 |
| Colour | White |
| Surface material | Steel |
| Marking techniques | Dye sublimation |
| Height (cm) | 0.1 |
| Width (cm) | 3.9 |
| Length (cm) | 14.0 |
| Gross weight (kg) | 44 |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question