Sublimable Acrylic Air Fresheners Clip
Air fresheners to place on the car's air vent. They include a 3 mm acrylic sheet customisable by sublimation.
- Pad to soak with your preferred scent and its refill
- Available fragrances in 10 ml bottles to perfume the pad
More information about the Sublimable Acrylic Air Fresheners Clip
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Sublimable acrylic sheet on the white side (reverse). The image can be seen through the front with a 3D effect
- Felt pad unscented. Apply a few drops of fragrance to saturate it
- Acrylic corners with rounded square shape
- Double-sided adhesive tape included to attach the already personalised plate to the clip
- Removable clip. Can be placed vertically or horizontally on the plate
- Clip with non-slip silicone for better grip
- The air fresheners come disassembled. The methacrylate sheet can be sublimated with a flat transfer press
- Essential oils with fragrance. Presented in a glass bottle inside a cardboard box
THINGS TO KEEP IN MIND
- The customisable side of the acrylic plate has a transparent plastic protective film that must be removed before sublimating
ASSEMBLY INSTRUCTIONS
- Slide the clip into the slot of the air freshener
- Place the pad in the air freshener compartment
- Saturate the pad with the fragrance of your choice
- Attach the included double-sided adhesive tape to the base of the clip
- Place the already sublimated acrylic plate on the other adhesive side of the clip
- Insert it into the car's air vent slot
MEASUREMENTS
AIR FRESHENERS
| Ref. | 055214 | 055215 |
| Shape | Round |
Square |
| Printing area (cm) | 5 | 5 x 5 |
| Sheet thickness (mm) |
3 |
3 |
| Air freshener (cm) | Ø5 x 4.3 | 5 x 5 x 4.3 |
| Clip (cm) | Ø2.4 x 4 | Ø2.4 x 4 |
| Weight (g) | 16 | 16 |
FRAGRANCES
| Ref. | 056046 | 056048 | 056047 |
| Scent | Lavender | Jasmine | Vanilla |
| Capacity (ml) | 10 | 10 | 10 |
| Container (cm) | Ø2.5 x 6 | Ø2.5 x 6 | Ø2.5 x 6 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
- Print the design in direct mode
- Heat the press to 190 ºC
- Remove the transparent plastic film covering each side of the sheet
- Place the sheet on the base of the press and the printed side of the paper on the white side. Secure them with heat-resistant adhesive tape
- Close the press with medium pressure for 75 seconds
- With the help of a protective glove, remove the freshly printed panel
- Carefully remove the paper
| Ref. | 953424 |
|---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question