More information about the Sublimable 3D Cube Medal Necklaces

INDEX

> Description

> Things to keep in mind

> Measurements

> Instructions and recommended sublimation parameters

DESCRIPTION

• Ideal as a personalised gift for special occasions such as anniversaries, birthdays, Valentine's Day, Mother's Day...
• Six-sided pendant, each side with adhesive for attaching the sublimated plates
• Link chain with a lobster clasp. Same colour as the pendant
• Only the white side of the aluminium plate is sublimable. Silver reverse is not sublimable
• Delivered in an individual cardboard box with pre-cut foam

THINGS TO KEEP IN MIND

• The customisable side of the plate has a protective film that must be removed before sublimation
• It is recommended to carefully fix the plate to the base. Once adhered, it may break if attempting to remove it

MEASUREMENTS

INSTRUCTIONS AND RECOMMENDED SUBLIMATION PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Remove the protective plastic from the white side of the plate
• Place the plate on the press with the printed side of the paper on the white side of the plate. Secure it with thermal adhesive tape
• Close the press with medium pressure for 40 seconds
• With the help of a protective glove, remove the freshly sublimated plate
• Carefully remove the paper
• Peel off the protective paper covering the adhesive on each of the 6 sides and attach the personalised plate