More information about the Power Engraver and Debris Tray Silhouette Curio 2

INDEX

> Power engraver

> Debris tray

> Instructions for use of the Power Engraver Tool

> Technical data

POWER ENGRAVER

• Engraver with electrical connection to the plotter, uses metal contacts and pins which are attached to the carriage to rotate the tip
• Milling machine that rotates at high speed to grind and engrave surfaces hard
• Automatic detection of the tool Power Engraver, once entered into the carriage 2 the Silhouette Studio software recognizes it without the need to select it
• Allows adjustment of pressure, speed, depth and other settings parameters from the software

DEBRIS TRAY

• The Debris Tray protects the machine the chip tray from the engraving and prevents possible damage when using the other tools electrical
• Easy to fit. Remove the electrostatic bed and replace it with the tray waste bed
• 35 x 35 cm working area

INSTRUCTIONS FOR USING THE ENGRAVING TOOL

• Place the tray waste bed
• Place the material on the tray and fix it with masking tape
• Place the tool from engraving on the toolholder right side of the carriage marked with the number 2
• The plotter will automatically detect it
• Place the carriage on top of the material, put a sheet of paper on top of it and press the height detection button
• Load the design to engrave in the program Silhouette Studio®
• Go to the panel at special tools and choose the tool from engraving
• Choose the type of filling you prefer
• Go to the panel submit and create a new material type
• Choose the icon of the Curio 2
• Click on the tab carriage 2 tab and from the drop-down on the right choose Other
• From the (+) icon, add the drill action.
• Modify the parameters you consider and save
• The plotter is ready to start engraving

TECHNICAL DATA