More information about the glitter self-adhesive vinyl - Aslan Sparkle SC123

INDEX

> Description

> Things to keep in mind

> Application instructions

> Technical details

> Storage recommendations

> Colour card

> Data sheet

DESCRIPTION

• Ideal for decorating or labelling all types of hard, smooth, non-porous surfaces: glass, wood, acrylic, metal and more
• Glossy textured feel. Glitter particles provide the perfect light reflection
• Double-sided colour effect, with less glitter on the back
• Very easy to apply due to the transparent film covering the vinyl and serving as a transfer tape
• Semi-permanent adhesive. The vinyl can be removed without leaving any residue
• Suitable for plotter cutting

THINGS TO KEEP IN MIND

• Do not apply to surfaces that give off fumes, such as untempered acrylic, as bubbles may form
• The substrate must be clean, free of dust, grease or lint
• Indoor application recommended. The glitter may wear off outdoors due to rain and humidity

INSTRUCTIONS FOR USE

1. Prepare your design in mirror image
2. Cut it inside out with a cutting machine. Make sure to cut only the vinyl and the liner, not the transfer tape
3. Scrap the excess, leaving the design on the transparent transfer tape
4. Remove the white liner that covers the adhesive
5. Place the cut design on the surface. Use a squeegee to make sure it sticks well
6. Remove the transfer tape

TECHNICAL DETAILS

STORAGE RECOMMENDATIONS

• Store in an upright position or on a roll holder
• Store in a place at -40ºC to 60ºC and a relative humidity of 50- 60%
• Can be stored for up to 2 years if recommendations are followed

COLOUR CARD

Colour card SparkleColour ASLAN SC 123 (pdf - 0.46 MB)

DATA SHEET

Data sheet SparkleColour ASLAN SC 123 (.pdf - 0.22 MB)