More information about DTF xTool Maintenance Solutions

INDEX

> Description

> Moisturising Liquid (Ref. 056799)

> Cleaning Liquid (Ref. 056800)

> Instructions for use

> Storage recommendations

> Safety recommendations

DESCRIPTION

• Helps to extend the printer’s lifespan by keeping the channels and components clean
• Designed to effectively remove residues with powerful cleaning action
• Formulated to safely clean the DTF xTool Apparel printer without damaging components

MOISTURISING LIQUID (REF. 056799)

• Maintains the printhead’s moisture level, improves ink flow, and prevents blockages
• 500 ml bottle with pouring spout for splash-free refilling of the tank

CLEANING LIQUID (REF. 056800)

• Cleaning solution in a 100 ml bottle. Removes persistent clogs, ink residues, and print quality issues
• Protects the printhead and extends its lifespan, especially after long periods of use or inactivity

INSTRUCTIONS FOR USE

MOISTURISING LIQUID

1. Remove the printer tank cap
2. Open the bottle and pour in the liquid
3. Ensure not to overfill the tank (maximum capacity 1000 ml)
4. Keep some liquid aside for regular maintenance

CLEANING LIQUID

1. Switch off the printer
2. Apply the cleaning liquid with swabs or cleaning cloths
3. For deep cleaning, soak the printhead following the manual’s instructions (maximum 1 hour to avoid damage)
4. Run a self-cleaning or self-washing cycle to remove any residue and prepare the printhead for use

STORAGE RECOMMENDATIONS

• Store between 5 ºC and 35 ºC in a cool, dry place
• Keep in its original, tightly closed container

SAFETY RECOMMENDATIONS

• Use gloves to protect the skin during handling
• Keep out of reach of children
• Avoid contact with eyes