More information about the DTF Color Prime Instant Peel Station Film

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Technical data

> Curing parameters

> Application instructions

> Storage recommendations

> Washing recommendations

> Measurements

DESCRIPTION

• High ink load layer: ensures high-quality prints with vivid, sharp and intense colours
• Universal peel: peel the film at any time you prefer, without affecting the final result. Immediately after pressing, either hot or cold
• High-speed ironing: requires only a few seconds for thermal transfer
• High ink absorption capacity: minimises or eliminates bleeding and ink displacement on the film surface
• Translucent: allows you to see the design from both sides of the film
• High-quality finishes: matte designs with a soft touch
• Versatile: suitable for all types of garments, regardless of material or colour
• Unrestricted transfers: apply the film with any transfer press that suits your needs

THINGS TO KEEP IN MIND

• Single-use film
• The non-printable side has a slight shine and is smooth. If you print on this side by mistake, you can remove the ink using kitchen paper or a napkin
• The film may yellow due to heat during curing, without affecting the white or colours of the design

TIPS AND ADVICE

• Use gloves to avoid stains, as fingerprints can affect print quality. The film can easily get dirty
• You can use any transfer press to apply the film, but for long-lasting transfers, we recommend using presses with precise temperature, pressure, and time settings

TECHNICAL DATA

*Values are indicative. We recommend conducting preliminary tests to make necessary adjustments before starting production.

CURING PARAMETERS

TRANSFER PRESS SUITABLE FOR CURING

The press should not come into direct contact with the design, only provide heat from approximately 3 cm away.

DTF OVEN

APPLICATION INSTRUCTIONS

• Print the design in mirror mode
• Apply the DTF powder, remove the excess, and cure it
• Cut the excess DTF film
• Pre-iron the garment for a few seconds to remove any wrinkles and moisture
• Place the film on the garment
• Iron following the application parameters specified in the table
• Peel the film at any time you prefer, continuously without pulling from the top
• Iron the garment again for 5 seconds using protective paper to improve the finish and durability

STORAGE RECOMMENDATIONS

• Store in a cool, dry place
• Avoid direct sunlight exposure
• Place on clean, flat surfaces when handling
• Keep the storage area clean and dust-free
• Do not compress the films
• Handle with gloves

WASHING RECOMMENDATIONS

• Wash at low temperature
• Turn garments inside out before washing
• Do not use bleach, fabric softeners or harsh detergents
• Preferably air dry
• Wait 48 h before the first wash
• If ironing is necessary, do so inside out and at a low temperature

MEASUREMENTS