Loading..

Product was successfully added to your shopping cart.
Starting at: €2.56 €3.40

Sublimation Water Bottle with screw cap - Aluminium

Ref. 921056

Sublimation Water Bottle with screw cap - Aluminium

  • Sublimation Water Bottle with screw cap - Aluminium -  Sublimation details
  • Sublimation Water Bottle with screw cap - Aluminium - Details of white and silver bottles
  • Sublimation Water Bottle with screw cap - Aluminium - Details of bottles with and without cap
  • Sublimation Water Bottle with screw cap - Aluminium - Screw cap details
Starting at: €2.56 €3.40

Sublimation Water Bottle with screw cap - Aluminium

Ref. 921056

A travel water bottle with screw cap you can personalise using sublimation printing.

  • Made of aluminium, either white or silver, both with gloss finish. Suitable for sublimation.
  • Available in 400 ml and 600 ml capacity.
  • Print area: 19 x 9 cm (400 ml bottles) - 21 x 14 cm (600 ml bottles)

More information about the aluminium water bottle with screw cap.

How to sublimate this bottle?

+ Read More
- Read Less
Availability: Make a selection first
  • Immediate:

* Required Fields

Starting at: €2.56 €3.40
/ Each Unit VAT not included

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Sublimation Water Bottle with screw cap - Aluminium Description

More information about the aluminium water bottle with screw cap for sublimation

  • Of multiple uses: take it on walks, hikes, trips, sport practices, to school...
  • Easy to wash, lightweight and very resistant.
  • Plastic cap free of Bisphenol A (BPA Free), black with screw closure.
  • With a ring and a metal carabiner hook to hang it on the bag or backpack, to carry the keys.
  • Can be personalised on all its outer area. However, to ensure better results, it is recommended to only sublimate the cylindrical body of the bottle, not the neck part.
  • Customisable with a mug heat press or a sublimation oven.
  • In Related Products, you may find wraps to sublimate these bottles. Moulds, silicone sheets and heat shrink bags are also available for its personalisation in a sublimation oven.
  • Comes in an individual cardboard box.

DIMENSIONS (APPROX.)

Reference nº
032569 032570 033314 033315
Colour White Silver White Silver
Volume capacity 14 oz ≈ 400 ml 14 oz ≈ 400 ml 20 oz ≈ 600 ml 20 oz ≈ 600 ml
Dimensions Ø6.5 x 17.5 cm Ø6.5 x 17.5 cm Ø7.3 x 21.5 cm Ø7.3 x 21.5 cm
Print area
19 x 9 cm 19 x 9 cm 21 x 12 cm 21 x 12 cm

Recommended instructions and parameters for sublimation printing

IN A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Put the bottle into the mug press.
  • Close the press at medium-heavy pressure for 120 seconds.
  • Using a protective glove, remove the newly printed bottle.
  • Remove the paper carefully.

IN A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the sublimation oven to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Place a wrap or a silicone sheet around the bottle. You can also introduce the bottle into a mould or a heat shrink bag and create a vacuum with a heat gun.
  • Put the bottle in the oven for 8 minutes.
  • Using a protective glove, remove the bottle.
  • Carefully remove the wrap, the silicone sheet or the bag and then the paper.
Additional Information
Reference nº 921 056
Dimensions (mm) Ø65 x 175 (400 ml) - Ø73 x 215 (600 ml)
Print area (mm) 190 x 90 (400 ml) - 210 x 140 (600 ml)
Colour Silver, White
Surface material Aluminium, Plastic
Items Bottles
Accessory details Carabiner, Ring
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

Sublimation Water Bottle with screw cap - Aluminium Description

More information about the aluminium water bottle with screw cap for sublimation

  • Of multiple uses: take it on walks, hikes, trips, sport practices, to school...
  • Easy to wash, lightweight and very resistant.
  • Plastic cap free of Bisphenol A (BPA Free), black with screw closure.
  • With a ring and a metal carabiner hook to hang it on the bag or backpack, to carry the keys.
  • Can be personalised on all its outer area. However, to ensure better results, it is recommended to only sublimate the cylindrical body of the bottle, not the neck part.
  • Customisable with a mug heat press or a sublimation oven.
  • In Related Products, you may find wraps to sublimate these bottles. Moulds, silicone sheets and heat shrink bags are also available for its personalisation in a sublimation oven.
  • Comes in an individual cardboard box.

DIMENSIONS (APPROX.)

Reference nº
032569 032570 033314 033315
Colour White Silver White Silver
Volume capacity 14 oz ≈ 400 ml 14 oz ≈ 400 ml 20 oz ≈ 600 ml 20 oz ≈ 600 ml
Dimensions Ø6.5 x 17.5 cm Ø6.5 x 17.5 cm Ø7.3 x 21.5 cm Ø7.3 x 21.5 cm
Print area
19 x 9 cm 19 x 9 cm 21 x 12 cm 21 x 12 cm

Recommended instructions and parameters for sublimation printing

IN A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Put the bottle into the mug press.
  • Close the press at medium-heavy pressure for 120 seconds.
  • Using a protective glove, remove the newly printed bottle.
  • Remove the paper carefully.

IN A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the sublimation oven to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Place a wrap or a silicone sheet around the bottle. You can also introduce the bottle into a mould or a heat shrink bag and create a vacuum with a heat gun.
  • Put the bottle in the oven for 8 minutes.
  • Using a protective glove, remove the bottle.
  • Carefully remove the wrap, the silicone sheet or the bag and then the paper.

Additional Information

Reference nº 921 056
Dimensions (mm) Ø65 x 175 (400 ml) - Ø73 x 215 (600 ml)
Print area (mm) 190 x 90 (400 ml) - 210 x 140 (600 ml)
Colour Silver, White
Surface material Aluminium, Plastic
Items Bottles
Accessory details Carabiner, Ring
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.