More information about the Adhesive for PMMA Acrylics

INDEX

> Description

> Things to keep in mind

> Compatibility with other plastics

> General usage instructions

> Usage recommendations

> Technical data sheet

> Safety data sheet

DESCRIPTION

• Colourless liquid adhesives suitable for bonding transparent, coloured, or opaline acrylics
• Easy to use: includes an application needle for more precise and uniform adhesion
• Resistant to UV rays and moisture
• For indoor or outdoor applications

THINGS TO KEEP IN MIND

• We recommend testing before starting production. Some acrylics may have an additional layer of another material that is not compatible with the adhesive
• After full curing, the pieces are firmly bonded with a transparent finish
• In outdoor applications, avoid moisture during curing

COMPATIBILITY WITH OTHER PLASTICS

GENERAL USAGE INSTRUCTIONS

1. Preparation: the surfaces to be bonded must be clean and dry
2. Application: use the included needle to apply a small amount of adhesive to the surfaces to be joined
3. Joining the pieces: before the adhesive evaporates, join the acrylic pieces and hold them firmly. You can use clamps
4. Drying: allow to dry for at least 24 h for the adhesive to fully harden
5. Final handling and storage: once the adhesive is cured, remove any clamps and handle the piece normally

USAGE RECOMMENDATIONS

• Keep the product away from heat sources
• Use gloves, goggles, and protective clothing during application
• Store in a well-ventilated place and out of reach of children

TECHNICAL DATA SHEET

SAFETY DATA SHEET

Safety data sheet for PMMA acrylic adhesive (.pdf - 0.47 MB)