More information about xTool laser machine accessories

INDEX

> xTool Machine Compatibility

> Original accessories and consumables for xTool:

> F1, F1 and F2 Ultra

> P2 and P2S

> S1

> M1

> M1 Ultra

> Compatible with all machines

XTOOL MACHINE COMPATIBILITY

^(*) Discontinued machine

^(**) Included as standard with the xTool S1 laser machine

xTool F1, F1 and F2 Ultra Accessories

Sliding Extension Base (Ref. 051400)

• Expands the working area up to 4 times (11,5 x 40 cm)
• Includes 5 clamps that provide stability and secure materials or objects
• Perfect for batch engraving in one session

Conveyor Belt (Ref. 055200)

• Doubles the working area (22 x 50 cm)
• Includes 2 pieces to attach to the machine and provide stability during use
• Stable yet lightweight for easy movement
• PU conveyor belt and aluminium frame. Supports objects up to 10 kg
• Easy to use: simply place the materials on the belt and the xTool F1 Ultra will do the rest
• Perfect for batch engraving products in one session or large pieces

Push Button Switch (Ref. 054868)

• Very useful for mass production. Press the button to operate the machine remotely without having to move from your workstation.
• 4 functions in 1: Start, pause, resume engraving, or process the job again.
• Cable with 1 m length

Pedal Switch (Ref. 054867)

• Very useful for mass production. Step on the pedal to operate the machine remotely without having to move from your workstation.
• 4 functions in 1: Start, pause, resume engraving, or process the job again.
• Cable with 2.45 m length
• The pedal reduces hand fatigue during long working sessions

xTool P2 and P2S Accessories

Raising Base (Black Ref. 054142)

• Increases the machine's maximum height from 74 mm to 215 mm high
• Features slots at different height levels for positioning the removable tray
• Easy to fit. It is placed under the machine without needing to dismantle it.
• Includes a side storage compartment
• Required to use the automatic feeder or the rotary accessory

Honeycomb Panel (Ref. 054143)

• Cuts and engraves objects larger than 15 mm in size, preventing them from falling into the tray or getting burned
• Handle design for easy handling
• Slim frame to maximise the usable cutting area
• Its structure allows air to circulate, preventing stains caused by smoke
• Supports up to 5 kg in weight
• Non-slip pads on its base prevent it from moving
• Includes 4 magnetic pins to hold the material and 1 cleaning brush

Automatic Feeder (Ref. 054144)

• Extends the working area up to 1000 × 500 mm
• Add more rails and increase the working area up to 3000 x 500 mm
• Engraves and cuts long materials in one go
• The rollers automatically move the material without interruptions
• Easy installation: the rails attach to the raising base (purchased separately) without the need for tools
• Requires the raising base for use

Additional Rails (Ref. 054145)

• When added to the automatic feeder, increases 1 m the length of the working area
• They easily attach to the feeder. The rail clips fit together

Clamps (Ref. 055177)

• Secure the material while the machine is running
• Easy to fit. They hook onto the metal sheets of the working area
• Hold materials up to 12 mm thick

xTool S1 ACCESSORIES (DISCONTINUED)

2W Infrared Laser Module (Ref. 054912)

• Enables engraving of materials that are not suitable for the diode laser: acrylics, metals (gold, silver, stainless steel, iron, etc.)
• Wavelength of 1064 nm
• Ultra-small laser spots of 0,03 x 0,03 mm. Delivers engraving with near-photographic resolution
• Installs easily in the machine without the need for special tools

Raising Base (Ref. 054913)

• Increases the machine's maximum working height from 42 mm to 125 mm high
• Easy to fit. It is placed under the machine without needing to dismantle it.
• Required to use the rotary accessory

Screen Printing Kit Screen Positioner (Ref. 05746)

• Keeps the xTool screen printing kit screen fixed and always in the same position
• Prevents movement or shifting during engraving
• Useful for multi-colour screen printing designs that require exact alignment between screens
• Installs easily inside the machine

xTool M1 ACCESSORIES (DISCONTINUED)

Raising Base with Honeycomb Panel (Ref. 051395)

• Increases the working height up to 120 mm high
• Features slots at different height levels to place the removable tray or the panel
• Easy to fit. It is placed under the machine without needing to dismantle it.
• Required to use the RA2 Pro rotary accessory
• Included honeycomb panel of 31 x 43 x 2,3 cm:
  
  • Structure that allows air circulation, achieving cuts without stains caused by smoke
  • Cuts and engraves objects larger than 15 mm in size, preventing them from falling into the tray or getting burned
  • Includes 4 magnetic pins to hold the material

Cutting Mats

• Adhesive layer that secures the material during cutting, preventing it from moving. Easy removal of pieces once the cut is finished
• Cutting area: 38 x 30,5 cm
• They have a transparent plastic protective film that you must remove before use and reapply after each use

Light Adhesion (blue) (Ref. 056589)

• For: thin and lightweight materials
• Adhesion: light
• Usage examples: adhesive paper, vinyl, kraft paper...

Fabric (pink) (Ref. 056588)

• For: fabric
• Adhesion: strong
• Usage examples: felt, cotton, canvas...

xTool M1 ULTRA ACCESSORIES (DISCONTINUED)

Raising Base with Honeycomb Panel (Ref. 055540)

• Increases the working height up to 125 mm high
• Features slots at different height levels to place the panel
• Easy to fit. It is placed under the machine without needing to dismantle it.
• Required to use the RA2 Pro rotary accessory
• Included honeycomb panel of 32,9 x 40,7 cm:
  • Structure that allows air circulation, achieving cuts without stains caused by smoke
  • Includes 4 magnetic pins to hold the material

Printing Module (Ref. 055541)

• Uses DYE inks with CMY colour model (cyan, magenta, yellow)
• Prints fabric, wood, paper, leather, stone...
• Automatically seals after each job, keeping the ink fresh
• Replacement CMY ink cartridge, available separately (ref. 055542)

Rotary Blade (Ref. 055547)

• Cuts fabrics and flexible materials such as denim, cotton, linen and felt
• Adapts to curves and contours
• Pack of 3 replacement blades, available separately (ref. 055548)

Foil Transfer Blade (Ref. 055546)

• For applying foil details on materials such as paper, cardstock, leather and soft wood
• Also for creating embossed designs
• Pack of 3 assorted replacement tips, available separately (ref. 055549)

Smart Air Assist (Ref. 055396)

• Improves cutting and engraving quality through controlled air flow
• Cleans the surface, removing particles and smoke generated during cutting or engraving
• Reduces burn marks and residue
• Includes a cotton filter to purify the air

Cutting Mats

• Adhesive layer that secures the material during cutting, preventing it from moving. Easy removal of pieces once the cut is finished
• Cutting area: 32,5 x 36 cm
• They have a transparent plastic protective film that you must remove before use and reapply after each use

Light Adhesion (blue) (Ref. 055554)

• For: thin and lightweight materials
• Adhesion: light
• Usage examples: adhesive paper, vinyl, kraft paper...

Fabric (pink) (Ref. 055553)

• For: fabric
• Adhesion: strong
• Usage examples: felt, cotton, canvas...

Accessories Compatible with All xTool Machines

RA2 Pro Rotary Accessory (Ref. 051399)

• Engraves objects by rotating them with precision, on spherical and cylindrical shapes such as mugs, rings, bottles...
• Includes 4 different adapters for objects: roller rotation, mandrel, sphere and ring
• 2 cables to connect it to xTool machines. Use the one compatible with your model
• Requires the raising base for use

RA2 Pro Rotary Accessory Kit (Ref. 055178)

• Expands the capabilities of the RA2 Pro rotary accessory:
  • More precise focus: the laser level indicates the centre axis on the piece held by the RA2 Pro, improving engraving quality
  • Engraving in different positions: allows you to tilt the object held by the RA2 Pro by up to 26 º. Achieves perfect alignment on tapered pieces, allows engraving inside rings...
  • More convenient mass production: handy positioning pieces for moving the RA2 Pro and placing it in the same spot without losing the engraving parameters
• Installs easily on the rotary accessory, without additional tools