The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the tall sublimation mugs with gender symbol handle - set of 2
Great as a gift for Valentine's Day, anniversaries, weddings, birthdays, stag and hen parties and much more.
Cylindrical bodies with 2 types of handles, one with the male gender symbol and the other with the female one.
Printable on the entire outer surface.
Suitable for personalising with a heat press machine using 10 oz mug heaters. Also with sublimation oven using clamps, silicone sheets or heat shrink bags.
Can also be personalised with other techniques such as DTF, laser engraving, screen printing, transfer and self-adhesive vinyl.
Delivered in a cardboard box.
DIMENSIONS (APPROX.)
Capacity
10 oz ≈ 295 ml
Inner diameter
Ø6,7 cm
Outer diameter
Ø7,3 cm
Thickness
3 mm
Base
Ø7 cm
Height
9.5 cm
Handle
1.1 x 7.8 cm
Mug-to-handle distance
3.3 cm
Print area
20 x 9.5 cm
Weight
549 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat resistant tape.
Press for 180-200 seconds, medium-heavy pressure.
Using a protective glove, remove the newly printed mug.
Remove the paper carefully.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the sublimation oven to 200ºC
Hold the paper's printed side against the mug and fix it with heat resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Place the mug in the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessories you used.