Sublimation Watch Band - Apple Samsung Huawei
Sublimation Watch Band - Apple Samsung Huawei
Watch band you can personalise using dye sublimation printing. Suitable for most brands of conventional watches as well as smartwatches.
- White leatherette or synthetic leather exterior, suitable for sublimation
- Metal buckle closure and black leatherette loop
- Available with and without Apple Watch adapters
- In widths from 20 to 34 mm
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
More information about the Apple, Samsung and Huawei watch bands for sublimation
- Perfect for replacing or alternating with other straps giving a different look to smartwatches or other watches with the correct width
- Watch strap or band suitable for almost any brand on the market. Consists of 2 bands: white on the outside and black on the inside
- Includes 3 spring bars: 2 for attaching the watch case to the strap and 1 smaller one for the buckle
- Suitable for personalisation on the entire surface, as the accessories can be detached from the strap. Some of them are presented separately
THINGS TO KEEP IN MIND
- Ref. 041312 and 041313 include 2 adapters or connectors for Apple smartwatches. They can also be used to attach the Apple Watch case to any other watch band
- The watch bands with adapters for Apple Watch include spring bars, which allows you to use them with any other watch without the adapters
- To find out which strap is suitable for your watch, you should measure the distance between the lugs where you place the spring bar and choose the strap with that width
- It is not recommended to put heat-resistant tape on the band during the sublimation process. It can leave marks or tear the leatherette when removed
DIMENSIONS (APPROX.)
| Reference no. | 041312 | 041313 | 041314 | 041315 |
| Apple Watch adapter |
3.1 cm | 3.4 cm | - | - |
| Band width |
2.2 cm |
2.4 cm |
2 cm | 2.2 cm |
| Length long band |
12 cm | 12 cm | 13 cm | 13 cm |
| Length short band |
6.5 cm |
8 cm |
6.5 cm |
6.5 cm |
| Wire twist |
2.4 cm |
2.6 cm |
2.2 cm |
2.4 cm |
| Thickness |
3 mm |
3 mm | 3 mm | 3 mm |
| Print area |
2.2 x 18.5 cm | 2.4 x 20 cm | 2 x 19.5 cm | 2.2 x 19.5 cm |
Recommended instructions and parameters for sublimation printing
- Print the design in mirror image
- Preheat the press to 200ºC
- Place the strap with the white side face up on the press' lower platen and the paper's printed side against it. Do not put heat-resistant tape on the strap. Removing the tape may damage the leatherette
- Press for 40 seconds, medium-heavy pressure
- Remove the newly printed band using a protective glove
- Carefully peel off the paper
- You can now add the buckle and accessories
Additional Information
| Ref. | 943377 |
|---|---|
| Thickness (mm) | 3 |
| Colour | White, Black |
| Surface material | Faux leather |
| Items | Clocks |
| Composition | Synthetic leather |
| Accessory details | Buckle |
| Marking techniques | Dye sublimation, Transfer, HTV |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0
reviews
5
4
3
2
1
Questions
No questions found for this product.
Be the first to ask a question!