Made of wood with natural maple veneer in natural colour matte finish
Smooth surface, resistant to humidity and scratch resistant
No front or back. Can be sublimated on either side
Rounded corners
It can also be personalised using other techniques such as laser engraving, DTF, self-adhesive vinyl, screen printing...
THINGS TO KEEP IN MIND
The surface may have veins specific to the natural wood. For the same reason, its colour may vary slightly from that shown in the photos sample in the photos
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mode mirror
Remove the metal ring and the plastic seal if worn
Preheat the press to 200 ºC
Place the keyring in the lower platen of the press and the printed part of the paper on the keyring. Fix it with thermal adhesive tape
Close the press with medium pressure for 40-45 seconds
With the help of a protective glove, remove the keyring Remove the freshly sublimated
Carefully peel off the paper
Repeat the same process to sublimate the other side of the keyring if desired
When it has cooled, place the ring and the snap fastener
https://www.brildor.com/en/sublimation-square-natural-wood-keyring-double-sided24440Sublimation Square Natural Wood Keyring Double-Sided<p><a name="saber-mas"></a></p>
<h2>More information about Sublimation Square Natural Wood Keyring Double-Sided</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Stencils</a></p>
<p>> <a href="#saber-mas4">Dimensions</a></p>
<p>> <a href="#saber-mas5">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Made of wood with natural maple veneer in natural colour matte finish</li>
<li>Smooth surface, resistant to humidity and scratch resistant</li>
<li>No front or back. Can be sublimated on either side</li>
<li>Rounded corners</li>
<li>It can also be personalised using other techniques such as <span class="azul-brildor-negrita">laser engraving</span>, <span class="azul-brildor-negrita">DTF</span>, <span class="azul-brildor-negrita">self-adhesive vinyl</span>, <span class="azul-brildor-negrita">screen printing</span>...</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The surface may have veins specific to the natural wood. For the same reason, its colour may vary slightly from that shown in the photos sample in the photos</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>TEMPLATE</strong></p>
<p><a title="Plantilla llavero madera natural cuadrado sublimable doble cara" href="https://www.brildor.com/media/upload/descargas/Plantilla_Llavero_Cuadrado_Madera_Natural.eps" target="_blank" rel="nofollow noopener">Template keyring natural wood sublimatable square double-sided (.eps - 1,06 MB).</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>DIMENSIONS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Keyring (cm)</strong></td>
<td><span class="azul-negrita">5,7 x 5,7</span></td>
</tr>
<tr>
<td><strong>Thickness (mm)</strong></td>
<td><span class="azul-negrita">4</span></td>
</tr>
<tr>
<td><strong>Metal ring (mm)</strong></td>
<td><span class="azul-negrita">Ø25</span></td>
</tr>
<tr>
<td><strong>Snap lock (mm)</strong></td>
<td><span class="azul-negrita">8 x 35</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters given <strong>for guidance</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Remove the metal ring and the plastic seal if worn</li>
<li>Preheat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Place the keyring in the lower platen of the press and the printed part of the paper on the keyring. Fix it with thermal adhesive tape</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">40-45 seconds</span></li>
<li>With the help of a protective glove, remove the keyring Remove the freshly sublimated</li>
<li>Carefully peel off the paper</li>
<li>Repeat the same process to sublimate the other side of the keyring if desired</li>
<li>When it has cooled, place the ring and the snap fastener</li>
</ul>https://www.brildor.com/media/catalog/product/l/l/llavero_madera_cuadrado_sublimable_dos_caras_d1.jpg1.79instock1.791.7900000https://www.brildor.com/media/catalog/product/l/l/llavero_madera_cuadrado_sublimable_dos_caras_d1.jpg24441247902542826521/Blanks/Blanks/Keyrings/Blanks/Keyrings/Wood2021-07-24T05:34:02+0000