Toilet bags with zip zip fastening y flap you can personalise using dye sublimationprinting. Can be used as a school pencil case, as a makeup bag at home or travel case.
Made of fabric from canvas from polyester 100%
They include a flap sublimatable flap that attaches with velcro and is easily interchangeable. More flaps can be purchased separately. Print area (flap): 19.5 x 8 cm
2 zipped pockets: 1 main one with gusseted bottom for extra capacity and stability; and a smaller one on the front
THINGS TO KEEP IN MIND
Leave the Velcro out of the press during sublimation
Cover the coloured part of the flap with protective paper to avoid burning or staining it during pressing
DIMENSIONS
Pencil case (cm)
20 x 12.5 x 6
Flap (cm)
19.8 x 16
Gusset (cm)
16 x 6
Large pocket (cm)
18 x 10 x 3
Small pocket (cm)
18.5 x 5.5
Flap print area (cm)
19.5 x 8
Weight (g)
94
Recommended instructions and parameters for sublimation printing
Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mirror image
Preheat the press to 200ºC
Cover the coloured part of the flap and the Velcro with protective paper and heat-resistant tape. If possible, leave the Velcro outside the press
Place the flap on the press' lower platen and the paper's printed side against it. Fix them with heat-resistant tape
Cover them with protective paper
Press for 45 seconds, medium pressure
Using a protective glove, remove the newly printed flap
https://www.brildor.com/en/sublimation-pencil-case-flap22300Sublimation Pencil Cases & Flap<p><a name="know-more"></a></p>
<h2>More information about the pencil cases for sublimation and its flap</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Velcro <strong>flap fastening</strong></li>
<li><strong>2 zipped pockets</strong>: 1 main one with <strong>gusseted bottom</strong> for extra capacity and stability; and a smaller one on the front</li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Leave the Velcro out of the press during sublimation</li>
<li>Cover the coloured part of the flap with protective paper to avoid burning or staining it during pressing</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>DIMENSIONS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Pencil case (cm)</strong></td>
<td><span class="azul-negrita">20 x 12.5 x 6<br></span></td>
</tr>
<tr>
<td><strong>Flap (cm)</strong></td>
<td><span class="azul-negrita">19.8 x 16<br></span></td>
</tr>
<tr>
<td><strong>Gusset (cm)</strong></td>
<td><span class="azul-negrita">16 x 6<br></span></td>
</tr>
<tr>
<td><strong>Large pocket (cm)</strong></td>
<td><span class="azul-negrita">18 x 10 x 3</span></td>
</tr>
<tr>
<td><strong>Small pocket (cm)</strong></td>
<td><span class="azul-negrita">18.5 x 5.5<br></span></td>
</tr>
<tr>
<td><strong>Flap print area (cm)</strong></td>
<td><span class="azul-negrita">19.5 x 8<br></span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita">94</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more4"></a></p>
<p><strong>Recommended instructions and parameters for sublimation printing</strong></p>
<p>Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.<strong><br></strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200ºC</span></li>
<li>Cover the coloured part of the flap and the Velcro with protective paper and heat-resistant tape. If possible, leave the Velcro outside the press</li>
<li>Place the flap on the press' lower platen and the paper's printed side against it. Fix them with heat-resistant tape</li>
<li>Cover them with protective paper</li>
<li>Press for <span class="azul-negrita">45 seconds</span>, medium pressure</li>
<li>Using a protective glove, remove the newly printed flap</li>
<li>Carefully peel off the paper</li>
</ul>
<p> </p>
<p> </p>https://www.brildor.com/media/catalog/product/e/s/estuches-sus-solapas-solapas-d12.jpg5.75instock05.75000https://www.brildor.com/media/catalog/product/e/s/estuches-sus-solapas-solapas-d12.jpg2279323214/Blanks/Blanks/School/Blanks/Stationery2021-07-24T06:10:17+0000
