Sublimation MDF3 "Baby on Board" Signs
Signs to be fixed on the glass of the car, customisable by dye sublimation printing.
- Wood MDF with 3 mm thick
- Including 2 suction cups
More information about the Sublimation MDF3 "Baby on Board" Signs
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Perfect signs to personalise with "Baby on board" signs for new drivers, pets...
- Sublimatable face gloss white
- Rounded corners with 2 holes for suction cup attachment
- You will find suction cups additional Related Products
THINGS TO KEEP IN MIND
- The face printable has film plastic and protective paper which must be removed before sublimation. For added protection, the back of some posters includes an additional layer additional paper which is easily removed
- Place the suction cups in the holes of the sign after sublimation
DIMENSIONS
| Ref. | 032006 | 053696 | 053700 | 053698 | 053697 |
| Shape | Square | Round | Triangle | Heart | Star |
| Poster (cm) | 13 x 13 | Ø13.9 | 12.8 x 14 | 13 x 14 | 14.3 x 14.3 |
| Thickness (mm) | 3 | 3 | 3 | 3 | 3 |
| Bore (mm) | Ø5 | Ø5 | Ø5 | Ø5 | Ø5 |
| Print area (cm) | 13 x 13 | Ø13.9 | 14 x 12.8 | 14 x 13 | 14.3 x 14.3 |
| Suction cup (cm) | Ø2 | Ø2 | Ø2 | Ø2 | Ø2 |
| Weight (g) | 57 | 55 | 37 | 44 | 42 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print on design at mode mirror
- Preheat the press to 180-200 °C
- Remove the protective plastic clear covering the printable side from sign
- Place the sign in the press between two protective papers and iron it for 10 seconds. This will remove any humidity that may have been absorbed by the wood
- Place the sign on the lower platen of the press and the printed part of the paper on it. Fix them with thermal adhesive tape
- Close the press with medium pressure for 80-85 seconds
- With the help of a protective glove remove the sign remove the freshly sublimated
- Peel off the paper carefully
- Place the suction cups into the holes so that the sign ready for use
| Ref. | 952054 |
|---|---|
| Thickness (mm) | 3 |
| Surface material | Wood |
| Items | Signs |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question