More information about the sublimable heart mug

INDEX

> Description

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Ergonomic groove for placing your finger when holding the handle. As well as providing comfort, it also makes it easier to hold the mug securely.
• Customisable using a mug heat press. Also suitable for sublimation oven using clamps, shrink bags or silicone sheets.
• Compatible packaging boxes available in Related Products
• Can also be personalised with other techniques such as screen printing, transfer, adhesive vinyl, UV printing...
  

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

The parameters provided are for guidance only. They may vary due to factors such as the paper used, inks, or ambient temperature. For this reason, it is recommended to carry out tests.

MUG HEAT PRESS

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the printed side of the paper onto the mug and secure it with heat-resistant tape
• Close the press at medium-high pressure for 180 seconds
• Remove the freshly printed mug using a protective glove
• Carefully remove the paper

SUBLIMATION OVEN

• Print the design in mirror mode
• Heat the sublimation oven to 180 ºC
• Place the printed side of the paper onto the mug and secure it with heat-resistant tape
• Fit a sublimation oven clamp or a silicone sheet to the mug. For this step, you can also use a shrink bag
• Place the mug in the oven for 13-15 minutes
• At the end of the process, remove the mug using a protective glove
• Carefully remove the paper