More information about the Sublimation Fabric Loop Keyring

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Ideal to capture an image, message or design and turn it into a wedding, communion, christening gift...
• Also as an advertising gift: slogan for companies, festivals, souvenirs, associations, clubs, fairs...
• Each keyring includes a metal ring to attach the key
• Serrated metal clasp that holds the fabric loop. It has a hook for the ring on the top metal part
• Each keyring is delivered in presentation packaging in an individual plastic bag with a self-adhesive closure
• You can also personalise this key ring by combining the sublimation technique with other techniques such as embroidery, rhinestones, screen printing and textile vinyl

THINGS TO KEEP IN MIND

• It is advisable to leave the metal part of the keyring outside the press in the sublimation process so that it is not damaged by heat.
• The serrated metal end cap is attached to the loop, the metal end cap is attached to the

DIMENSIONS

INSTRUCTIONS AND RECOMMENDED SUBLIMATION PARAMETERS

Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the iron to 200 °C
• Place the fabric loop on the iron and leave out the ring and the metal part. Adjust the iron as much as possible to the metal part to sublimate the entire surface. Place heat tape on the metal part to avoid any damage
• Insert protective paper between the two sides of the loop to avoid staining the side you are not sublimating
• Place the printed design on the fabric loop. Secure it with heat tape to prevent it from moving
• Close the iron and sublimate at medium-high pressure for 45 seconds
• Open the iron and remove the sublimated fabric loop with a protective glove
• Carefully remove the printed paper
• Repeat the process to sublimate the other side