More information about the Sublimation Dominoes Game & Insert

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Tiles of polymer (fibre plastic) in white matte
• Sublimable on both sides and edges
• High print quality end result
• Easily manipulated by children. Slightly smaller than standard dominoes
• High-temperature-resistant plastic insert. It is reusable

THINGS TO KEEP IN MIND

• The tiles do not have any pre-printing. They are white and smooth on both sides
• 3 packs of dominoes are required to create a complete 28-piece domino. There are 2 left over for spares
• After sublimating one side of the dominoes tiles, turn the insert without removing them to sublimate the other side

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters given as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mode mirror
• Preheat the press to 200 °C
• Place protective paper in the lower platen and on it the insert with the dominoes tiles
• Place the printed part of the paper on the tiles. You can fix it with heat tape to prevent the design from moving
• Completely cover the pieces to be sublimated with protective paper to ensurethat the heat plate of the plate does not get stained
• Close the press at medium-high pressure for 40 seconds
• With the help of a protective glove, remove the tiles from the insert just sublimated
• Carefully peel off the paper
• If you want to sublimate the other side of the tiles, wait for them to cool down and repeat all the steps above