Sublimation Cushion Covers with reversible sequins - Square

More information about square cushion covers with reversible sequins for sublimation

• Metallic colours available: white, red, black, rose gold, purple, blue and gold.
• Front side manufactured with reversible sequins: one side is white, and the other of the selected colour.
• Sequins are suitable for sublimation. For optimal results, it is recommended to print only on the white side of the sequin.
• Back side made of soft microfibre fabric.
• Side closure with an invisible zip.
• Sequins sewn as mermaid scales. They are reversed by running the hand over it from top to bottom.
• Cover fillings are to be purchased separately. You may find them in Related Products.
• When making a full-size personalisation, the printing on the edges may show some slight defects. It is recommended to keep a small margin unprinted.

DIMENSIONS (APPROX.)

WASHING RECOMMENDATIONS

• Hand or machine washable at a maximum temperature of 30ºC.
• Do not use bleach.
• Do not dry-clean.
• Do not tumble dry.

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image.
• Preheat the press to 190ºC.
• Place the cover on the press' lower plate. Make sure that only the white side of the sequin is visible. (printable side).
• Place the paper's printed side against the white side of the sequin. Attach with heat resistant tape to prevent them from moving.
• Close the press at medium pressure for 30 seconds.
• Using a protective glove, remove the newly printed cover.
• Remove the paper carefully.