More information about the Sublimation Conical Mug - Coloured Inside & Open Handle

INDEX

> Description

> Customisation template

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Conical body with an original open handle design
• Suitable for sublimation on the entire external surface
• Can also be customised with other techniques such as DTF, screen printing, transfer and vinyl
• Compatible boxes available separately

CUSTOMISATION TEMPLATE

To view the template layers, open the PDF file using Photoshop.

Conical mug template with coloured interior and open handle (.pdf - 0.20 MB)

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters provided as a guideline. They may vary due to many factors such as the paper used, inks, or ambient temperature. For this reason, testing is recommended.

USING A MUG PRESS

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the printed paper around the mug and secure it with heat-resistant tape
• Close the press at medium pressure for 180 seconds
• With the help of a protective glove, remove the freshly printed mug
• Carefully remove the paper

USING A SUBLIMATION OVEN

• Print the design in mirror mode
• Heat the oven to 180 ºC
• Place the printed paper around the mug and secure it with heat-resistant tape
• Adjust the clamp, or place the mug inside a shrink bag and heat it with a heat gun, avoiding the formation of wrinkles. You can also use a silicone sheet
• Place the mug in the oven for 13-15 minutes
• With the help of a protective glove, remove the clamp, silicone sheet or bag, as appropriate
• Carefully remove the paper from the mug