More information about the Sublimatable Tape Measures 5m with Clip

INDEX

> Description

> Things to keep in mind

> Measurements

> Instructions and recommended sublimation parameters

DESCRIPTION

• Black colour with accessories available in yellow and blue
• White tape measure with black and red numbering
• Metal clip for attaching to belts, pockets, waistband, etc.
• Black plastic transport strap, which can also be used for hanging
• Round aluminium plate with white coating, suitable for sublimation. Customisable on one side only
• Tab to lock or unlock the tape measure
• Side with a round area to fix the plate after sublimation. This area is slightly larger than the plate, so it does not cover it completely (see measurements below)
• Ergonomic and durable
• Comes in an individual white cardboard box

THINGS TO KEEP IN MIND

• To adhere the plate to the tape measure, you can use double-sided adhesive tape or silicone. In the Related Products section, you will find some suitable options for this

MEASUREMENTS

INSTRUCTIONS AND RECOMMENDED SUBLIMATION PARAMETERS

Parameters indicated for guidance purposes. It is recommended to carry out preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the plate on the base of the press with the printed side of the paper on the plate
• Close the press with medium-high pressure for 40 seconds
• Using a protective glove, remove the freshly printed plate
• Carefully remove the paper