As low as €2.36

Sublimable Mug with Pre-printed Interior "Te amo"

Sublimable Mug with Pre-printed Interior "Te amo"

11 oz high-quality mug customisable by sublimation.

  • White ceramic with a glossy finish and pre-printed interior Te amo
  • Dishwasher and microwave safe
  • Customisable area: 23 x 9.7 cm

More information

Immediate: 120 units
  • 6 for €2.80 each
  • 12 for €2.66 each
  • 36 for €2.51 each
  • 72 for €2.36 each
€2.95
€2.95 VAT included

2 by 2 units

More information about the Sublimable Mug with Pre-printed Interior "Te amo"

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

  • Interior with red hearts and "Te amo" message, excellent as a gift for Valentine's Day, Mother's Day, anniversaries...
  • Cylindrical body, customisable on its entire exterior surface
  • Suitable for customisation with a transfer press using 11 oz resistances. Also with a sublimation oven using clamps, shrink bags, or silicone sheets
  • Can also be customised with other techniques such as DTF, screen printing, transfer, and adhesive vinyl

THINGS TO KEEP IN MIND

  • Does not include a box. In Related Products you will find box models to present or transport this mug

MEASUREMENTS

Capacity (oz ≈ ml)
11 ≈ 325
Printing area (cm)
23 x 9.7
Interior diameter (cm)
Ø7.3
Base (cm)
Ø8.1
Height (cm)
9.7
Thickness (mm)
3
Handle (cm)
1.4 x 7.3
Distance mug-handle (cm)
3.7
Weight (g)
314

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

WITH MUG PRESS

  • Print the design in mirror mode
  • Heat the press to 180 ºC
  • Place the paper with the printed side on the mug and secure it with thermal adhesive tape
  • Close the press with medium-high pressure for 200 seconds
  • With the help of a protective glove, remove the freshly sublimated mug
  • Carefully remove the paper

WITH SUBLIMATION OVEN

  • Print the design in mirror mode
  • Heat the oven to 180 ºC
  • Place the printed design in mirror mode around the mug and secure it using thermal adhesive tape
  • Adjust the clamp, or place the mug inside a shrink bag and heat with a heat gun avoiding wrinkle formation. You can also use a silicone sheet
  • Sublimate in the oven for 13-15 minutes
  • With the help of a protective glove, remove the clamp, silicone sheet, or shrink bag, as applicable
  • Carefully remove the paper from the mug

RELATED POSTS

More than 10 Customisable Gift Ideas for Valentine's Day

Additional Information
Ref. 035542
Gross Weight (kg) 0.314
Billable Weight (kg) 0.360000
Dimensions (mm) Ø81 x 97
Print area (mm) 230 x 97
Thickness (mm) 30
Colour White
Surface material Ceramic
Items Mugs
Accessory details Handles
Marking techniques Dye sublimation

Reviews

Share your opinion

It will only take a minute, and your opinion can help other customers.

Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0 reviews
5
0
4
0
3
0
2
0
1
0

Questions

No questions found for this product.

Be the first to ask a question!